https://community.extremenetworks.com/t5/extremeswitching-exos-switch/accessing-the-web-gui-initial-setup/m-p/50204#M13449 Create Date: Oct 10 2012 6:52PM<BR /> <BR /> I'm having a pita trying to access the web gui during initial setup. <BR /> <BR /> I set an IP address to the mgmt vlan, and am able to ping it if I plug a host into the mgmt interface. I can not open 80/443.<BR /> I created a new vlan, assigned it an ip, assigned it to all ports, and still no luck.<BR /> <BR /> What am I doing wrong? <BR /> <BR /> Thanks!<BR /> <BR /> EDIT - I figured this out. I needed to issue the "enable web http" command. (from Jeremy_Homan) Wed, 08 Jan 2014 05:56:00 GMT EtherNation_Use 2014-01-08T05:56:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/accessing-the-web-gui-initial-setup/m-p/50204#M13449 Create Date: Oct 10 2012 6:52PM<BR /> <BR /> I'm having a pita trying to access the web gui during initial setup. <BR /> <BR /> I set an IP address to the mgmt vlan, and am able to ping it if I plug a host into the mgmt interface. I can not open 80/443.<BR /> I created a new vlan, assigned it an ip, assigned it to all ports, and still no luck.<BR /> <BR /> What am I doing wrong? <BR /> <BR /> Thanks!<BR /> <BR /> EDIT - I figured this out. I needed to issue the "enable web http" command. (from Jeremy_Homan) Wed, 08 Jan 2014 05:56:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/accessing-the-web-gui-initial-setup/m-p/50204#M13449 EtherNation_Use 2014-01-08T05:56:00Z