https://community.extremenetworks.com/t5/extremeswitching-exos-switch/configure-meter-on-a-single-port/m-p/50477#M13560 Create Date: Nov 21 2013 7:41PM<BR /> <BR /> Hi, <BR /> <BR /> try with this one <BR /> <BR /> if { <BR /> vlan-id 12; <BR /> } then { <BR /> <BR /> meter MyMeter;<BR /> permit; <BR /> }<BR /> <BR /> }<BR /> <BR /> --<BR /> Jarek (from Jaroslaw_Kasjaniuk) Wed, 08 Jan 2014 08:57:00 GMT EtherNation_Use 2014-01-08T08:57:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/configure-meter-on-a-single-port/m-p/50476#M13559 Create Date: Nov 19 2013 9:35PM<BR /> <BR /> I want to control maximum bandwidth to 100 MB on a single port. here is what I have tried:<BR /> create meter HundredMbps_ingress<BR /> configure meter HundredMbps_ingress committed-rate 100 Mbps out-action drop<BR /> edit policy HundredMbLimit<BR /> <BR /> ### (HundredMbLimit.pol)<BR /> entry limit100Mb {<BR /> if match any {<BR /> } then { <BR /> permit;meter HundredMbps_ingress; <BR /> }<BR /> }<BR /> ##<BR /> configure access-list HundredMbLimit port 32 ingressThe bandwidth is not limited.<BR /> Anyone see any errors here? Wondering if I SHould I be using QoS instead? Stuck<BR /> Thanks for you time (from David_Kordyban) Wed, 08 Jan 2014 08:57:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/configure-meter-on-a-single-port/m-p/50476#M13559 EtherNation_Use 2014-01-08T08:57:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/configure-meter-on-a-single-port/m-p/50477#M13560 Create Date: Nov 21 2013 7:41PM<BR /> <BR /> Hi, <BR /> <BR /> try with this one <BR /> <BR /> if { <BR /> vlan-id 12; <BR /> } then { <BR /> <BR /> meter MyMeter;<BR /> permit; <BR /> }<BR /> <BR /> }<BR /> <BR /> --<BR /> Jarek (from Jaroslaw_Kasjaniuk) Wed, 08 Jan 2014 08:57:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/configure-meter-on-a-single-port/m-p/50477#M13560 EtherNation_Use 2014-01-08T08:57:00Z