G48Te Modules failing to boot

EtherNation_Use — Wed, 08 Jan 2014 05:54:00 GMT

Create Date: Aug 8 2012 4:22AM

I have 2 x Black Diamond 8810s and following some reduction in requirement I decided to move some of the blades from one to the other and keep one as a cold spare.
After swapping the cards into the other 8810 2 of them are not working.

This is the output i get from show version detail:

Chassis : 800128-00-03 07125-00768 Rev 3.0
Slot-1 : 800157-00-08 0649F-00187 Rev 8.0 IMG: 11.6.2.9
Slot-2 : 800157-00-08 0649F-00165 Rev 8.0 IMG: 11.6.2.9
Slot-3 : 800157-00-08 0649F-00189 Rev 8.0 BootROM: 1.0.1.11 IMG: 11.6.2.9
Slot-4 : 800158-00-08 0704F-00158 Rev 8.0 BootROM: 1.0.1.11 IMG: 11.6.2.9
Slot-5 :
Slot-6 :
Slot-7 : 800202-00-07 0714F-00125 Rev 7.0 BootROM: 1.0.1.11 IMG: 11.6.2.9
Slot-8 : 800202-00-07 0714F-00164 Rev 7.0 BootROM: 1.0.1.11 IMG: 11.6.2.9
Slot-9 : 800202-00-07 0712F-00058 Rev 7.0 BootROM: 1.0.1.11 IMG: 11.6.2.9
Slot-10 : 800202-00-07 0714F-00153 Rev 7.0 BootROM: 1.0.1.11 IMG: 11.6.2.9
MSM-A : 800196-00-04 07105-00179 Rev 4.0 BootROM: 1.0.1.11 IMG: 11.6.2.9
MSM-B : 800196-00-04 07025-00128 Rev 4.0 BootROM: 1.0.1.11 IMG: 11.6.2.9
PSUCTRL-1 : 450105-00-01 07125-00549 Rev 1.0 BootROM: 2.13
PSUCTRL-2 : 450105-00-01 07125-00488 Rev 1.0 BootROM: 2.13

No bootrom is showing on the top to modules? Is there anyway to upgrade\install the bootrom on an individual module?

This is the output i receive from one of the Slots:

Slot-1 information:
State: Failed
Download %: 100
Flags: S
Last Error: CardExec (state BOOTING) timed out
Serial number: 800157-00-08 0649F-00187
Hw Module Type:G48Te
SW Version: 11.6.2.9
SW Build: v1162b9
Configured Type:
Ports available: 48
Recovery Mode: Reset

Has anyone seen this before? Any help would be greatly appreciated.

Regards,

Phill.
(from Phillip_Wakeman)

topic G48Te Modules failing to boot in ExtremeSwitching (EXOS/Switch Engine)

G48Te Modules failing to boot