https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mlag-with-2-x650-to-1-juniper-mx5/m-p/50899#M13752 Create Date: Sep 13 2012 12:10PM<BR /> <BR /> Hello RigzThe current version of XOS does not support LACP with MLAG. That support will come in a version of code later in the year.P (from Paul_Russo) Wed, 08 Jan 2014 05:55:00 GMT EtherNation_Use 2014-01-08T05:55:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mlag-with-2-x650-to-1-juniper-mx5/m-p/50898#M13751 Create Date: Sep 12 2012 11:59PM<BR /> <BR /> Hi,<BR /> <BR /> Has anyone had any experience with setting up MLAG between 2 Extreme X650 and 1 Juniper MX5. <BR /> <BR /> So interface ge-1/0/8 and ge-1/0/9 on the MX5 connect into port 1 on X650 switch A (core1) and port 2 on X650 switch b (core2) using MLAG id 2.<BR /> <BR /> The Juniper is sending LACP packets however not receiving any back from the X650s<BR /> <BR /> show mlag peer<BR /> Multi-switch Link Aggregation Peers:<BR /> <BR /> MLAG Peer : core2<BR /> VLAN : isc-cbr Virtual Router : VR-Default<BR /> Local IP Address : 172.30.110.1 Peer IP Address : 172.30.110.2<BR /> MLAG ports : 3 Tx-Interval : 1000 ms<BR /> Checkpoint Status : Up Peer Tx-Interval : 1000 ms<BR /> Rx-Hellos : 704374 Tx-Hellos : 709225<BR /> Rx-Checkpoint Msgs: 5292 Tx-Checkpoint Msgs: 5298<BR /> Rx-Hello Errors : 0 Tx-Hello Errors : 0<BR /> Hello Timeouts : 5 Checkpoint Errors : 0<BR /> Up Time : 0d:20h:24m:46s Peer Conn.Failures: 5<BR /> <BR /> show mlag ports<BR /> <BR /> Local Local Remote<BR /> MLAG Local Link Remote Peer Fail Fail<BR /> Id Port State Link Peer Status Count Count<BR /> ================================================================================<BR /> 2 1 A Up core2 Up 0 0<BR /> 1 5 A Up core2 Up 0 0<BR /> ================================================================================<BR /> <BR /> (from shannon_rigby) Wed, 08 Jan 2014 05:55:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mlag-with-2-x650-to-1-juniper-mx5/m-p/50898#M13751 EtherNation_Use 2014-01-08T05:55:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mlag-with-2-x650-to-1-juniper-mx5/m-p/50899#M13752 Create Date: Sep 13 2012 12:10PM<BR /> <BR /> Hello RigzThe current version of XOS does not support LACP with MLAG. That support will come in a version of code later in the year.P (from Paul_Russo) Wed, 08 Jan 2014 05:55:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mlag-with-2-x650-to-1-juniper-mx5/m-p/50899#M13752 EtherNation_Use 2014-01-08T05:55:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mlag-with-2-x650-to-1-juniper-mx5/m-p/50900#M13753 Create Date: Sep 13 2012 9:53PM<BR /> <BR /> Thanks for your reply, turned of lacp on junipers all sweet.<BR /> <BR /> (from shannon_rigby) Wed, 08 Jan 2014 05:55:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mlag-with-2-x650-to-1-juniper-mx5/m-p/50900#M13753 EtherNation_Use 2014-01-08T05:55:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mlag-with-2-x650-to-1-juniper-mx5/m-p/50901#M13754 Create Date: Sep 14 2012 11:59AM<BR /> <BR /> Good to hear. LACP support is coming just not sure exact time. Should be before Feb 2013. (from Paul_Russo) Wed, 08 Jan 2014 05:55:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mlag-with-2-x650-to-1-juniper-mx5/m-p/50901#M13754 EtherNation_Use 2014-01-08T05:55:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mlag-with-2-x650-to-1-juniper-mx5/m-p/50902#M13755 Create Date: Sep 14 2012 2:51PM<BR /> <BR /> yes that caught me out yesterday, (from conrad_jones) Wed, 08 Jan 2014 05:55:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mlag-with-2-x650-to-1-juniper-mx5/m-p/50902#M13755 EtherNation_Use 2014-01-08T05:55:00Z