https://community.extremenetworks.com/t5/extremeswitching-exos-switch/problems-related-to-port-utilization-command/m-p/21113#M1384 Create Date: Jul 20 2012 8:03AM<BR /> <BR /> You could use SNMP to create graphs for the utilization. (from Rickard_Sellstedt) Wed, 08 Jan 2014 06:50:00 GMT EtherNation_Use 2014-01-08T06:50:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/problems-related-to-port-utilization-command/m-p/21112#M1383 Create Date: Jul 12 2012 9:29AM<BR /> <BR /> Hi ExpertWe are facing the following problem: we are making graphics with the port utilization, but after an upgrade from EW 7.6.2.1 to 7.8.4.1 patch1-r4 the graphics on switch B (we have vrrp master - slave) the traffic curve is flat, like if the switch would be making rate shaping or something like that. The thing is, after perform a "show tech-support all" the graphics shows an increment on the traffic and the curve now is "normal" .Can somebody to explain how works "show tech-support" ? Why could be affecting in some way the reporting on show port utilization?Thanks in advance!Roxana (from Roxana_Rojas) Wed, 08 Jan 2014 06:50:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/problems-related-to-port-utilization-command/m-p/21112#M1383 EtherNation_Use 2014-01-08T06:50:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/problems-related-to-port-utilization-command/m-p/21113#M1384 Create Date: Jul 20 2012 8:03AM<BR /> <BR /> You could use SNMP to create graphs for the utilization. (from Rickard_Sellstedt) Wed, 08 Jan 2014 06:50:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/problems-related-to-port-utilization-command/m-p/21113#M1384 EtherNation_Use 2014-01-08T06:50:00Z