https://community.extremenetworks.com/t5/extremeswitching-exos-switch/disable-remove-license-from-x460/m-p/51256#M13926 Thanks for the info Paul! Tue, 10 Jun 2014 02:33:00 GMT bw447 2014-06-10T02:33:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/disable-remove-license-from-x460/m-p/51254#M13924 I have an x460 that came as an Edge license, but I purchased a Core license and have enabled the purchased license. I want to RMA the switch because it doesn't work right and we've only had it for 2 months. The port link light on the switch don't light up when a port is active for ports 1-24. Is it possible to disable or remove the license and put it on a functional switch? Thanks in advance. -B Tue, 10 Jun 2014 00:29:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/disable-remove-license-from-x460/m-p/51254#M13924 bw447 2014-06-10T00:29:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/disable-remove-license-from-x460/m-p/51255#M13925 Hey Blake<BR /> <BR /> Once a license is installed it is always a part of the switch. The RMA however should come with a new license for that serial number. I would recommend highlighting that when you open the RMA just to make sure there are no delays.<BR /> <BR /> Hope that helps<BR /> <BR /> P<BR /> Tue, 10 Jun 2014 01:43:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/disable-remove-license-from-x460/m-p/51255#M13925 Paul_Russo 2014-06-10T01:43:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/disable-remove-license-from-x460/m-p/51256#M13926 Thanks for the info Paul! Tue, 10 Jun 2014 02:33:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/disable-remove-license-from-x460/m-p/51256#M13926 bw447 2014-06-10T02:33:00Z