https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x450a-snmp-temp-sensor-not-updating/m-p/51270#M13931 My SNMPv2 monitoring server is set to monitor OID 1.3.6.1.4.1.1916.1.1.1.8.0 (snmp temp sensor) on an extreme x450a (version 12.4.1.7).<BR /> <BR /> The problem:<BR /> <BR /> - When the server queries the switch, the switch always reports the same temperature.<BR /> <BR /> - When I log into the switch (CLI) and run "show temp" or "show snmp get <OID>" I see the correct temp.<BR /> <BR /> - The next time my monitoring service queries the switch, it reports the new temp.<BR /> <BR /> Wireshark captures confirm the packet coming back from the switch is the old stale value. <BR /> <BR /> Not sure if the switch is caching this or what. Is there a way to fix this?<BR /> <BR /></OID> Tue, 06 Feb 2018 23:13:00 GMT Kaon_Thana 2018-02-06T23:13:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x450a-snmp-temp-sensor-not-updating/m-p/51270#M13931 My SNMPv2 monitoring server is set to monitor OID 1.3.6.1.4.1.1916.1.1.1.8.0 (snmp temp sensor) on an extreme x450a (version 12.4.1.7).<BR /> <BR /> The problem:<BR /> <BR /> - When the server queries the switch, the switch always reports the same temperature.<BR /> <BR /> - When I log into the switch (CLI) and run "show temp" or "show snmp get <OID>" I see the correct temp.<BR /> <BR /> - The next time my monitoring service queries the switch, it reports the new temp.<BR /> <BR /> Wireshark captures confirm the packet coming back from the switch is the old stale value. <BR /> <BR /> Not sure if the switch is caching this or what. Is there a way to fix this?<BR /> <BR /></OID> Tue, 06 Feb 2018 23:13:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x450a-snmp-temp-sensor-not-updating/m-p/51270#M13931 Kaon_Thana 2018-02-06T23:13:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x450a-snmp-temp-sensor-not-updating/m-p/51271#M13932 Hi Kaon,<BR /> <BR /> This bug is fixed from 12.4.4.8-patch1-2<BR /> 12.x EXOS versions are end of support, i would recommend to take a look at the below link and upgrade to supported and stable version of EXOS. <BR /> <BR /> <A href="https://www.extremenetworks.com/extreme-hardwaresoftware-compatibility-recommendation-matrices/software-release-recommendations/" target="_blank" rel="nofollow noreferrer noopener">https://www.extremenetworks.com/extreme-hardwaresoftware-compatibility-recommendation-matrices/softw...</A> Wed, 07 Feb 2018 10:50:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x450a-snmp-temp-sensor-not-updating/m-p/51271#M13932 Karthik_Mohando 2018-02-07T10:50:00Z