topic RE: Telnet admin password in ExtremeSwitching (EXOS/Switch Engine)

Telnet admin password

agd — Tue, 17 Nov 2015 09:37:00 GMT

It's possible to enable password auth when using telnet ?

Thanks.

RE: Telnet admin password

Thomas__Ajo — Tue, 17 Nov 2015 10:02:00 GMT

Hi,

It is enabled by default.
You can use the admin username/password

RE: Telnet admin password

David_Rahn — Tue, 17 Nov 2015 10:03:00 GMT

configure account admin

RE: Telnet admin password

Necheporenko__N — Tue, 17 Nov 2015 13:45:00 GMT

* x430-24p.1 # show configuration aaa detail | i admin
configure account admin encrypted "2hQRzn$ZzEZu1oRj/hWKJjJxt4Q00"
* x430-24p.2 # configure account "admin" password
password Change account password
password-policy Account password policy
* x430-24p.2 # configure account "admin" password
Current user's password:
New password:
Reenter password:
* x430-24p.3 # show configuration aaa detail | i admin
configure account admin encrypted "B93Q0o$00vjVIyO169i9P1hw.OGb." <--- password has been changed

RE: Telnet admin password

agd — Tue, 17 Nov 2015 19:34:00 GMT

Thanks !