best practices for connecting unify voip ip phone on Enterasys C5 switches.

Stefano_Damone — Fri, 08 Apr 2016 18:11:00 GMT

I would kindly to know what best practice follow to have more convergence and less network congestion for Voip phone connected on the C5 model switch.Currently traffic is well managed on my switch, as an example the ge.1.46 port as intended for PC and IP Phone:
SW-L.T._P.3 (on) -> show vlan Portinfo
ge.1.46 1 N untagged: 1 tagged: 4
ge.1.47 1 N untagged: 1 tagged: 4.99
while pt ge.1.47 is a trunk port to another switch.

VLAN 1 VLAN data for pc
VLAN 4 VLAN VOIP
VLAN 99 VLAN switch management

Should I implement QoS? If so, you can indicate a template to follow?
Thank you
ps: I would like to give greater priority to VOIP VLAN 4, and that the least possible delay situations.

RE: best practices for connecting unify voip ip phone on Enterasys C5 switches.

Mike_D — Tue, 12 Apr 2016 06:40:00 GMT

Hello Stefano,

The QoS application and concepts are easier using Netsight and Policy Manager (Extreme NMS) but this short article fits the template description and should help if using CLI:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-Priortize-All-Traffic-in-a-VLAN-by-Setting-the-P-Bit-on-Securestack/

In the mood for a quick dose of EOS/Securestack theory and application?
https://gtacknowledge.extremenetworks.com/articles/Q_A/How-does-an-Admin-profile-Policy-Rule-differ-from-a-non-Admin-Policy-Rule/

Best,
Mike

topic RE: best practices for connecting unify voip ip phone on Enterasys C5 switches. in ExtremeSwitching (EXOS/Switch Engine)

best practices for connecting unify voip ip phone on Enterasys C5 switches.

RE: best practices for connecting unify voip ip phone on Enterasys C5 switches.