topic RE: Unable to push X430 xos image in ExtremeSwitching (EXOS/Switch Engine)

Unable to push X430 xos image

Vaseem_Owais — Mon, 23 Jan 2017 21:19:00 GMT

I am unable to push the xos image in X430 switch even i was able to ping viceversa i.e from laptop to switch & switch to laptop.

Aleixo_Gomes — Mon, 23 Jan 2017 21:23:00 GMT

Ron_Huygens — Mon, 23 Jan 2017 21:24:00 GMT

remember that by default the switch try to download an image through VR-Mgmt.
If you are connected to any normal front port you have to specify VR-Default

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Obtain-and-Upgrade-EXOS

faste — Mon, 23 Jan 2017 21:26:00 GMT

specify which vr are being used for the download. IE. download image vr vr-default primary

Drew_C — Mon, 23 Jan 2017 21:29:00 GMT

Also note, the X430 uses the

code:

summitlite

image, and not the typical

code:

summitX

one.
Does the X430 use the summitX image or the summitlite image?

Your download command will need to look something like this:

code:

download image (TFTP Server IP) summitlite-16.1.4.2.xos vr vr-default