topic RE: STP topology and configuration steps in ExtremeSwitching (EXOS/Switch Engine)

STP topology and configuration steps

Dinesh_Kumar — Wed, 02 Sep 2015 19:17:00 GMT

I am new to this xtereme switch so am in a situation to configure stp. I have to setup STP in two X650-24x(SSns), so if anyone share me a topology to setup STP and configuration steps it will be a great helpful.

RE: STP topology and configuration steps

BrandonC — Wed, 02 Sep 2015 22:14:00 GMT

Hi Dinesh,

This GTAC Knowledge article may be helpful:
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-RSTP-in-EXOS

-Brandon

RE: STP topology and configuration steps

Patrick_Voss — Wed, 02 Sep 2015 22:56:00 GMT

Hi Dinesh,

As mentioned in the other post we need something a little more specific to help you. Do you have a network already setup? are you starting from scratch? Did the resources I linked in the other post help?

RE: STP topology and configuration steps

Dinesh_Kumar — Wed, 02 Sep 2015 23:06:00 GMT

Hi Voss,

I am starting from the scratch, I am doing a lab setup configuring rstp in two switch. So I need the step by step configuration for the two switch with a simple topology diagram.

RE: STP topology and configuration steps

Dinesh_Kumar — Wed, 02 Sep 2015 23:08:00 GMT

|------------|port4 port4 |-----------|
| switch1 |------------------| switch2|
| |------------------| |
|------------|port5 port5 |-----------|

Configuration for this setup

RE: STP topology and configuration steps

Patrick_Voss — Wed, 02 Sep 2015 23:14:00 GMT

Hi Dinesh,

Based on this information the article Brandon and I linked has everything you need. You will just need to fill in the VLAN and port information into the commands.

RE: STP topology and configuration steps

Dinesh_Kumar — Wed, 02 Sep 2015 23:25:00 GMT

OK Voss. Thanks.