topic RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled in ExtremeSwitching (EXOS/Switch Engine)

Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Phillip_Hood — Thu, 09 Feb 2017 23:50:00 GMT

I have 2 x620-16t switches that my coworker has setup. The 2nd switch was setup using the config from the first one and had the IP changed so the config should be the same. However, I am not able to get the archive working in EMC/Inventory Mgr. It gives the error "Connection refused, CLI access is not enabled for this device". I got the first one working but this one will not. How to I enable this when all settings that I know of are or should be the same as the first switch?

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Patrick_Voss — Thu, 09 Feb 2017 23:54:00 GMT

Hello Phillip,

Do you have any configuration on either switch in relation to an access profile or any type of security configuration?

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Phillip_Hood — Thu, 09 Feb 2017 23:54:00 GMT

Are you talking about the SNMP profile? They are both set to the same as all other switches.

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Ronald_Dvorak — Fri, 10 Feb 2017 00:00:00 GMT

Check in EMC if both are set to the same profile in device mapping (lower part of the screen) ...

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Phillip_Hood — Fri, 10 Feb 2017 00:00:00 GMT

They are the same.

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Zdeněk_Pala — Fri, 10 Feb 2017 00:04:00 GMT

If you use SSH, do you have the key generated? What is the "show management" output from both? Any difference there?

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Zdeněk_Pala — Fri, 10 Feb 2017 00:04:00 GMT

Disable and enable ssh ?

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Zdeněk_Pala — Fri, 10 Feb 2017 00:04:00 GMT

Anything in the switch log?

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Phillip_Hood — Fri, 10 Feb 2017 00:04:00 GMT

Firmware Rev 1.0.1.7, Software Rev 21.1.1.4

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Patrick_Voss — Fri, 10 Feb 2017 00:04:00 GMT

What is the patch?

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Phillip_Hood — Fri, 10 Feb 2017 00:04:00 GMT

Patch 1-2

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Ronald_Dvorak — Fri, 10 Feb 2017 00:04:00 GMT

what version is running on the switch

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Ronald_Dvorak — Fri, 10 Feb 2017 00:04:00 GMT

+1, what Pala wrote..also...

A basic test would be to telnet/ssh to both switches (from the EMC CLI) using the same user/pw - just to check whether the user/pw is the same on both - you didn't mentioned if that works.

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Phillip_Hood — Fri, 10 Feb 2017 00:04:00 GMT

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Phillip_Hood — Fri, 10 Feb 2017 00:04:00 GMT

I set the username and password the same on both. The odd thing is, I can use that login info with SSH on the first switch that was setup but I cannot use SSH on the 2nd switch but the same login info works with telnet. Using Putty.

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Jeremy_Gibbs — Fri, 10 Feb 2017 05:08:00 GMT

Remove the switch and re-add it. If that's possible...

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Phillip_Hood — Fri, 24 Feb 2017 21:00:00 GMT

Well, it turns out that there was a bug for SSH in the firmware version that came on the switches. The latest that came out on February 1st is supposed to fix it and I will be applying that to both switches today and retesting.

RE: Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Scott_Van_Arts1 — Fri, 16 Jul 2021 01:26:00 GMT

Disable and enable ssh ?

Old topic but I ran into this issue today on an X460-G2 switch. This solved the problem for me.