topic asset discovery tool download in ExtremeSwitching (EXOS/Switch Engine)

asset discovery tool download

Randy_Middleton — Thu, 11 Dec 2014 23:18:00 GMT

Where can I download the Asset Discovery Tool?
Have new PC and need to install on it.

RE: asset discovery tool download

Drew_C — Fri, 12 Dec 2014 05:43:00 GMT

Hi Randy,
Sorry to have kept you waiting.

At present, you can find a link to download the Asset Discovery Tool on the homepage of our support portal.
This is where it points you to: https://extremeportal.force.com/ExtrDownloadDetail?id=a41340000005Rmw (Login required)

-Drew

Edit (1/23/17): Updated download link
Edit (1/29/18): Updated download link and location information

RE: asset discovery tool download

Randy_Middleton — Fri, 12 Dec 2014 22:15:00 GMT

Thank you! Not sure how I missed that!

RE: asset discovery tool download

Drew_C — Sat, 13 Dec 2014 01:15:00 GMT

No problem, Randy. Glad to help.
If you encounter any problems with it, or have questions, you can create a new topic here or call in for support and I'll help get you taken care of.

-Drew

RE: asset discovery tool download

Ryan_Mathews — Fri, 16 Jan 2015 23:52:00 GMT

The Asset Discovery Tool (ADT) makes it easy to obtain a list of all Extreme Networks serial numbers in your network. This is very useful for checking on warranty and hardware maintenance status by providing the list to Extreme Networks. Simply run the tool with the proper SNMP credentials on a target range of IP addresses. Details on how to use ADT are in the "Help – Contents" menu within the application, once installed.

Download it here: http://www.extremenetworks.com/ftp/ftp_new.aspx?file=ADTSetup.exe

RE: asset discovery tool download

Josimar_Rivera — Wed, 11 Feb 2015 03:39:00 GMT

Hello,

I have installed the ADT and I'm trying to use it, but after configure the SNMP credentials when I'm try to obtain all the serial numbers of my network it sends me an error, I'm using the Switch Core IP address as seed IP address.

RE: asset discovery tool download

Drew_C — Wed, 11 Feb 2015 03:39:00 GMT

Hi Josimar,
If you try a range of IPs instead of the core IP for seeding, do you get any better results? Can you also let me know the error message you're seeing?
Start small, like a /24 or /25 block of IPs that you know should have some devices.

RE: asset discovery tool download

Josimar_Rivera — Wed, 11 Feb 2015 03:39:00 GMT

I'm trying with the 10.170.70.254/24 (Swicth Core IP Address), and at the switch logs I saw the next "02/10/2015 14:33:20.61 MSM-A: SNMP access from source 10.170.70.125 is denied by rule snmp_access2. Dropping this Request."; that is my IP address, here we have an ACL but it supose that al the block of IP is inside of the rule.

RE: asset discovery tool download

Drew_C — Wed, 11 Feb 2015 03:39:00 GMT

Good on you for having some security in the network! 🙂
Unfortunately, it sounds like you've got yourself blocked. It's probably easiest to take a look at the ACL to see what is allowed and run the scan from within that subnet. Otherwise, you'll have lots of switches requiring an ACL update to let yourself in.

RE: asset discovery tool download

Josimar_Rivera — Wed, 11 Feb 2015 03:39:00 GMT

but if the subnet were allowed at the ACL??

RE: asset discovery tool download

Drew_C — Wed, 11 Feb 2015 03:39:00 GMT

You shouldn't have any problems if your PC's subnet is allowed in your ACL.
I believe you can check this with the following command (rule-name based on your log message above):

code:

show access-list rule snmp_access2

RE: asset discovery tool download

Drew_C — Thu, 14 May 2015 02:28:00 GMT

Minor update to the thread... there's now a GTAC Knowledge article on this topic.
http://gtacknowledge.extremenetworks.com/articles/How_To/Obtain-a-List-of-Serial-Numbers-IP-Addresses-and-Firmware-Versions-of-Extreme-Networks-Switches/