topic RE: Dual Stack IPv4/IPv6 Support in ExtremeSwitching (EXOS/Switch Engine)

Dual Stack IPv4/IPv6 Support

Waqas_Naeem — Wed, 01 Mar 2017 17:51:00 GMT

Does Extreme Switches support Dual-Stack IPv4/IPv6? If so, does it support on all Summit & BlackDiamond switches? Is there any licensing level requirement?

RE: Dual Stack IPv4/IPv6 Support

Ron_Huygens — Wed, 01 Mar 2017 17:55:00 GMT

IPV4 / IPv6 dual stacking is enabled by default.
No additional config or license is required.

RE: Dual Stack IPv4/IPv6 Support

Waqas_Naeem — Wed, 01 Mar 2017 17:55:00 GMT

Thanks; is it available on all platforms (Summit/BD)?

RE: Dual Stack IPv4/IPv6 Support

Frank — Wed, 01 Mar 2017 17:55:00 GMT

We run dual-stack on our BD8806, Summit 460s, and Summit 480s. I would assume it's across the board (BD/Summit)

RE: Dual Stack IPv4/IPv6 Support

Ron_Huygens — Wed, 01 Mar 2017 17:55:00 GMT

correct, this is available on all platforms in edge mode:

http://documentation.extremenetworks.com/flr/EXOS_21_1/Feature_License_Requirements/r_edge-license-f...

RE: Dual Stack IPv4/IPv6 Support

Sharad — Wed, 01 Mar 2017 17:55:00 GMT

Is it available on ISW series switches as well?

RE: Dual Stack IPv4/IPv6 Support

Basit_Rafiqi — Fri, 29 Sep 2017 15:48:00 GMT

Please confirm if it is supported on ISW switches?

RE: Dual Stack IPv4/IPv6 Support

Drew_C — Fri, 29 Sep 2017 15:48:00 GMT

Hi Basit, please take a look at this thread: https://community.extremenetworks.com/extreme/topics/ipv6-support-on-isw

RE: Dual Stack IPv4/IPv6 Support

Basit_Rafiqi — Fri, 29 Sep 2017 15:48:00 GMT

Thanks Drew for your reply. To be more specific I want reference for RFC4213 in ISW Switches.

RE: Dual Stack IPv4/IPv6 Support

Basit_Rafiqi — Fri, 29 Sep 2017 15:48:00 GMT

ISW supports Dual Stack & RFC 4213 as well.

RE: Dual Stack IPv4/IPv6 Support

Austacem — Fri, 15 Mar 2019 01:10:00 GMT

Hi everyone.

I have a Matrix N7 Switch Core here in the company and I would like know if it support IPv6 protocol? I'm having problem to enable IPv6 routing on it..

tks.