NTP Process show different result

Li_Ping_Hsu — Tue, 23 Jun 2015 05:25:00 GMT

NTP process on X350 and X440 show differnet result.

For switch X440-24t
Firmware Xos:16.1.1.4
30B1F-1.2 # sh ntp sys
System Peer : 0.0.0.0
System Peer Mode : Unspec
Leap Indicator : 11
Stratum : 16
Precision : -13
Root Distance : 0.00000 second
Root Dipersion : 3.78917 second
Reference ID : [init]
Referene Time : 00000000.00000000 Thu, Feb 7 2036 14:28:16.000
System Flags : Broadcast Client, Authentication, Monitor, NTP, Kernel, Stats
Jitter : 0.000000 second
Stability : 0.000 ppm
Broadcast Delay : 0.007996 second
Auth Delay : 0.000000 second

For X150-24p
Firmware: 15.3.2 Pathc1-3

30B1F-2.2 # sh ntp sys
System Peer : 10.2.30.254
System Peer Mode : Control
Leap Indicator : 00
Stratum : 12
Precision : -19
Root Distance : 0.00800 second
Root Dipersion : 0.02699 second
Reference ID : [10.2.30.254]
Referene Time : d931cfa4.151047a6 Mon, Jun 22 2015 8:04:52.082
System Flags : Broadcast Client, Authentication, Monitor, NTP, Kernel, Stats
Jitter : 0.000061 second
Stability : 0.000 ppm
Broadcast Delay : 0.007996 second
Auth Delay : 0.000000 second

why it show different result

RE: NTP Process show different result

Drew_C — Tue, 23 Jun 2015 06:02:00 GMT

It looks like NTP isn't configured on your X440. That's why they're different.
Take a look at this article for the basics of configuring NTP on an EXOS switch.

topic RE: NTP Process show different result in ExtremeSwitching (EXOS/Switch Engine)

NTP Process show different result

RE: NTP Process show different result