Not able to communicate between platforms via X440-8t switch

biju_das — Thu, 05 Nov 2015 22:36:00 GMT

Hi,

I have 2 Linux devices with ip address 192.168.1.5 and 192.168.1.7

and a VM(virtual machine) with ip address 192.168.1.30.

Can you please provide the configurations to communicate the Linux devices to VM through

the X440-8t switch?

Currently I have connected VM port to Management port and able to communicate

management port with VM.

ping vr vr-mgmt 192.168.1.30
Ping(ICMP) 192.168.1.30: 4 packets, 8 data bytes, interval 1 second(s).
16 bytes from 192.168.1.30: icmp_seq=0 ttl=64 time=0.939 ms

--- 192.168.1.30 ping statistics ---
4 packets transmitted, 4 packets received, 0% loss
round-trip min/avg/max = 0/7/9 ms

But I am not able to communicate Linux devices with VM.

* X440-8t.3 # show vlan
---------------------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
---------------------------------------------------------------------------------------------
Default 1 --------------------------------T--------------- ANY 1 /12 VR-Default
Mgmt 4095 192.168.1.10 /24 ---------------------------- ANY 1 /1 VR-Mgmt
---------------------------------------------------------------------------------------------

Total number of VLAN(s) : 2
* X440-8t.4 # show switch

SysName: X440-8t
SysLocation:
SysContact: support@extremenetworks.com, +1 888 257 3000
System MAC: 00:04:96:97:7C:27
System Type: X440-8t

SysHealth check: Enabled (Normal)
Recovery Mode: All
System Watchdog: Enabled

Current Time: Thu Nov 5 23:35:24 2015
Timezone: [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC.
Boot Time: Thu Nov 5 21:53:18 2015
Boot Count: 15
Next Reboot: None scheduled
System UpTime: 1 hour 42 minutes 6 seconds

Current State: OPERATIONAL
Image Selected: primary
Image Booted: primary
Primary ver: 15.3.1.4
patch1-19
Secondary ver: 15.3.1.4

Config Selected: primary.cfg
Config Booted: primary.cfg

primary.cfg Created by ExtremeXOS version 15.3.1.4
87856 bytes saved on Thu Nov 5 19:14:04 2015

regds,

Biju

RE: Not able to communicate between platforms via X440-8t switch

Frank — Thu, 05 Nov 2015 22:45:00 GMT

I don't think you can make the management port talk with any of the other ports - it's completely separate.
I would give the management port a different IP (just for clarity), plug the VM and the two Linux servers into the regular ports, and see if that helps.

Frank

RE: Not able to communicate between platforms via X440-8t switch

biju_das — Thu, 05 Nov 2015 22:45:00 GMT

OK Thanks. Now I am able to communicate with VM and Linux device.

regds,

Biju

topic RE: Not able to communicate between platforms via X440-8t switch in ExtremeSwitching (EXOS/Switch Engine)

Not able to communicate between platforms via X440-8t switch

RE: Not able to communicate between platforms via X440-8t switch

RE: Not able to communicate between platforms via X440-8t switch