topic RE: Run script after successful login in ExtremeSwitching (EXOS/Switch Engine)

Run script after successful login

GONÇALO_NUNO_CO — Thu, 22 Mar 2018 20:54:00 GMT

Hi, How can i configure an EXOS switch to run a .xsf script for all users after each successful login.

Regards
Gonçalo Reis

RE: Run script after successful login

Nikunj_Tonthana — Thu, 22 Mar 2018 20:58:00 GMT

Hi Gonçalo,

If you are using EXOS version 22.3+, you can use VI to create a script named "exshrc.xsf". This script will be run each time a user logs in. It is meant only for shell specific configuration, but you can put pretty much any command in there.

Thanks,
Nikunj

[edited to correct version number --Drew]

RE: Run script after successful login

Nikunj_Tonthana — Thu, 22 Mar 2018 20:58:00 GMT

Sorry, this will work for EXOS 22.3 and above.

RE: Run script after successful login

Drew_C — Thu, 22 Mar 2018 20:58:00 GMT

I just edited your post to reflect this correction, Nikunj.

RE: Run script after successful login

Drew_C — Thu, 22 Mar 2018 21:00:00 GMT

Hi Gonçalo,
Take a look at this topic: https://community.extremenetworks.com/extreme/topics/xos-how-to-create-cli-aliases-shortcuts

Specifically, the post by Dave Hammers. As Nikunj mentioned above,

code:

exshrc.xsf

is what you're looking for.

RE: Run script after successful login

BrandonC — Thu, 22 Mar 2018 21:00:00 GMT

Here's a link directly to the post for simplicity:

https://community.extremenetworks.com/extreme/topics/xos-how-to-create-cli-aliases-shortcuts?topic-r...

RE: Run script after successful login

GONÇALO_NUNO_CO — Thu, 22 Mar 2018 21:20:00 GMT

...Just like that, dump exshrc.xsf in /usr/local/cfg and you are ready to go. Thats great guys. Thanks a lot.

Regards
Gonçalo Reis