https://community.extremenetworks.com/t5/extremeswitching-exos-switch/lacp-active-backup/m-p/53687#M15161 Create Date: May 14 2013 11:22AM<BR /> <BR /> Hello. <BR /> <BR /> I have a Summit X350-48T on my DC and i need to configure the LACP on mode active/backup.<BR /> Iam working 2 weeks on it and dont works, it are always balancing trought the pri/sec ports.<BR /> <BR /> I need the flow just on primary and the secondary is a redundat link, secundary must be used only if primary lost LACP communication.<BR /> All connections bellow are Layer 2, i need to redundant the connection on summit 1 trought 2 others switches.<BR /> The cenario dont permit use of "configure port XX redundant XX link off".So, really need to be via LACP. <BR /> <BR /> --------------------------------<BR /> --------------- | CISCO 7018 with lacp |-----------------<BR /> | bkp -------------------------------- |<BR /> ---------------------------- \<BR /> | Summit X350-48T 1 | &gt;&gt; NETWORK CLOUD <BR /> ---------------------------- /<BR /> eth | active --------------------------- |<BR /> ------------------|Summit X350-48T 2 |----------------------<BR /> ---------------------------<BR /> <BR /> Thanks in advanced. (from Pedro Azzi) Wed, 08 Jan 2014 06:02:00 GMT EtherNation_Use 2014-01-08T06:02:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/lacp-active-backup/m-p/53687#M15161 Create Date: May 14 2013 11:22AM<BR /> <BR /> Hello. <BR /> <BR /> I have a Summit X350-48T on my DC and i need to configure the LACP on mode active/backup.<BR /> Iam working 2 weeks on it and dont works, it are always balancing trought the pri/sec ports.<BR /> <BR /> I need the flow just on primary and the secondary is a redundat link, secundary must be used only if primary lost LACP communication.<BR /> All connections bellow are Layer 2, i need to redundant the connection on summit 1 trought 2 others switches.<BR /> The cenario dont permit use of "configure port XX redundant XX link off".So, really need to be via LACP. <BR /> <BR /> --------------------------------<BR /> --------------- | CISCO 7018 with lacp |-----------------<BR /> | bkp -------------------------------- |<BR /> ---------------------------- \<BR /> | Summit X350-48T 1 | &gt;&gt; NETWORK CLOUD <BR /> ---------------------------- /<BR /> eth | active --------------------------- |<BR /> ------------------|Summit X350-48T 2 |----------------------<BR /> ---------------------------<BR /> <BR /> Thanks in advanced. (from Pedro Azzi) Wed, 08 Jan 2014 06:02:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/lacp-active-backup/m-p/53687#M15161 EtherNation_Use 2014-01-08T06:02:00Z