Not able to create vrrp in X460-48t summit switch

Sunday_Orjingen — Thu, 28 Sep 2017 20:02:00 GMT

X460-48t.3 # show version

Switch : 800538-00-10 1515N-43544 Rev 10.0 BootROM: 2.0.2.3 IMG: 15.5.3.4

PSU-1 : PSSW301201A -02 800519-00-06 1512A-40004

PSU-2 : PSSW301201A -05 800519-00-06 1710A-40145

Image : ExtremeXOS version 15.5.3.4 v1553b4 by release-manager

on Fri Nov 7 12:56:24 EST 2014

BootROM : 2.0.2.3

Diagnostics : 6.3

X460-48t.4 #

Below is part of where the issue is…

# Module vsm configuration.

#

X460-48t.3 #

X460-48t.3 #

X460-48t.3 # create vrr

^

%% Invalid input detected at '^' marker.

X460-48t.3 # enablr

^

%% Invalid input detected at '^' marker.

X460-48t.3 # enable vrr

^

You can see the list of command available for VR.

X460-48t.3 # enable

access-list Access list

auto-provision Allow switch to obtain the IP Address, Gateway, Config file via DHCP

bfd BFD specific settings

bootp Configure BOOTP client

bootprelay Configure BOOTP Relay service

cdp Cisco Discovery Protocol (CDP)

cfm IEEE 802.1ag - Connectivity Fault Management

clear-flow CLEAR-Flow agent

cli Command Line Interface settings

cli-config-logging CLI command logging

clipaging Display command output one screenful at a time

cpu-monitoring Monitor system/process cpu utilization

dhcp Configure DHCP client

diffserv diffserv

dos-protect automatic denial-of-service protection

dot1p dot1p

eaps EAPS (Ethernet Automatic Protection Switching) domain

edp EDP

elrp-client ELRP (Extreme Loop Recovery Protocol) Client

elsm ELSM (Extreme Link Status Monitoring)

erps Ethernet Ring Protection Switching (ITU-T G.8032)

esrp ESRP (Extreme Standby Router Protocol) Domain

ethernet Ethernet OAM

fdb Configure FDB related parameter

fip FCoE Initialization Protocol

flooding flooding

flow-control Pause frame handling

icmp icmp option

identity-management Identity Management

idletimeout Timeout for idling configuration session

igmp Internet Group Management Protocol

ip-fix Enable IPFIX module

ip-option ip option

ip-security IP Security

iparp ip arp command

ipforwarding IP forwarding

ipmcforwarding IP Multicast Forwarding

iproute IP routing module

irdp ICMP Router Discovery Protocol

jumbo-frame jumbo-frame

learning learning

led LED display functions

license license or feature pack

lldp Configure LLDP specific settings

log Configure log service

loopback-mode loopback

mac-lockdown-timeout mac lockdown timeout

mirror Mirror feature configuration

mlag Multi-switch Link Aggregation used to combine remote ports and local ports to a common logical connection

mld Multicast Listener Discovery Protocol

mvr Multicast VLAN Registration

mvrp Multiple VLAN Registration Protocol

neighbor-discovery IPv6 neighbor

netlogin Network Login related commands

ntp Network Time Protocol

pim PIMv6 cache entries

ports Physical ports

radius Radius Client

radius-accounting Radius Client Accounting

rip RIP Routing

r.png R.png Routing

rmon RMON CLI command

router-discovery IPv6 Router Discovery

sflow Enable SFLOW module

sharing Load sharing

smartredundancy smart redundancy on a port(related to Software redundant port feature)

snmp Enable SNMP

snmpv3 SNMPv3

sntp-client Enable SNTP client

stacking Stacking

stpd STP domain

subvlan-proxy-arp Configure sub-VLAN proxy ARP

syslog Configure syslog service

tacacs TACACS+ Client

tacacs-accounting TACACS+ Client Accounting

tacacs-authorization TACACS+ Client Cli Authorization

tech-support Technical support

telnet allow incoming telnet connections

tunnel tunnel

udp-echo-server UDP-Echo Server

upm Universal port manager

virtual-router virtual router

vlan VLAN configuration

vm-tracking Virtual Machine mac tracking

vman Virtual Metropolitan Area Network

vr virtual router

watchdog watchdog monitoring feature

web Web access

xml-mode Raw XML configuration mode

xml-notification XML Notification Process

EAPS domain name

RE: Not able to create vrrp in X460-48t summit switch

Patrick_Voss — Thu, 28 Sep 2017 20:05:00 GMT

Hello Sunday,

Can you show us the "show license" output?

RE: Not able to create vrrp in X460-48t summit switch

Sunday_Orjingen — Thu, 28 Sep 2017 20:16:00 GMT

* X460-48t.6 # show licenses
Enabled License Level:
Edge
Enabled Feature Packs:
None
* X460-48t.7 #

RE: Not able to create vrrp in X460-48t summit switch

Patrick_Voss — Thu, 28 Sep 2017 20:23:00 GMT

You need an Advanced Edge or Core license in order to configure VRRP:

https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-minimum-license-requirement-to-run-VRRP

RE: Not able to create vrrp in X460-48t summit switch

Sunday_Orjingen — Thu, 28 Sep 2017 20:44:00 GMT

Thank you Patrick

RE: Not able to create vrrp in X460-48t summit switch

Bin — Tue, 03 Oct 2017 05:11:00 GMT

Hi,
The following URL shows features in our license modules on EXOS.
http://documentation.extremenetworks.com/FLR_16/EXOS_16_2/Feature_License_Requirements/r_advanced-ed...

topic RE: Not able to create vrrp in X460-48t summit switch in ExtremeSwitching (EXOS/Switch Engine)

Not able to create vrrp in X460-48t summit switch

RE: Not able to create vrrp in X460-48t summit switch

RE: Not able to create vrrp in X460-48t summit switch

RE: Not able to create vrrp in X460-48t summit switch

RE: Not able to create vrrp in X460-48t summit switch

RE: Not able to create vrrp in X460-48t summit switch