topic RE: Warn:EPM.hello_rate EXOS21.1.3.7 in ExtremeSwitching (EXOS/Switch Engine)

Warn:EPM.hello_rate EXOS21.1.3.7

Chacko — Tue, 21 Feb 2017 16:52:00 GMT

Hi,

after upgrading our X670G2 from 21.1.2.14 to 21.1.3.7 due to the SSH-problem (https://community.extremenetworks.com/extreme/topics/x670-g2-with-exos-21-1-2-14-establishing-ssh-se...) there are errors in the log, after establishing a ssh session:

...
02/20/2017 15:46:34.99 Process exsshd sends hello too often, expected once in 10 secs02/20/2017 15:46:34.99 Received hellos from process exsshd 2 more often then expected 3
02/19/2017 03:01:37.98 Process exsshd sends hello too often, expected once in 10 secs
02/19/2017 03:01:37.98 Received hellos from process exsshd 2 more often then expected 3
02/18/2017 03:01:32.30 Process exsshd sends hello too often, expected once in 10 secs
02/18/2017 03:01:32.30 Received hellos from process exsshd 2 more often then expected 3
...

SSH-Client is PuTTY 0.60

Has anyone ideas or the same logs?

Best Regards
Chacko

RE: Warn:EPM.hello_rate EXOS21.1.3.7

David_Choi — Tue, 21 Feb 2017 17:14:00 GMT

Hi Chacko,

There are several customers reporting the same log these days and Extreme Engineering is now working on potential fix in local lab with CR# xos0067055. As this log issue was reported recently, there is not scope of fix version yet.

It is confirmed that there should not be any functionality impact by these log messages.

RE: Warn:EPM.hello_rate EXOS21.1.3.7

ar1 — Wed, 11 Oct 2017 11:05:00 GMT

Hello All,
I see the same massages in Syslog from a X430-48t since I update the switch to 16.2.2.4.
But I didn't recognize any functionality impact.