topic RE: How to configure VLAN on extreme summit X450 in ExtremeSwitching (EXOS/Switch Engine)

How to configure VLAN on extreme summit X450

VIGNESH_PALANIS — Wed, 16 Dec 2015 14:36:00 GMT

Hai friends, i want to configure VLAN on extreme switch what is the exact command to configure it model no is summit X450

RE: How to configure VLAN on extreme summit X450

Rahman_Duran1 — Wed, 16 Dec 2015 16:01:00 GMT

Hi,

You should just follow EXOS documentation. Basically you create vlan and add ports to that vlan either tagged or untagged;

create vlan test
configure vlan test tag 10
configure vlan test add ports 1-12 untagged
configure vlan test add ports 24 tagged

RE: How to configure VLAN on extreme summit X450

Drew_C — Wed, 16 Dec 2015 21:09:00 GMT

Welcome to The Hub, Vignesh!
I would also recommend that you have a look at the EXOS Quick Guide. It covers a lot of the basics.
In addition, GTAC Knowledge is great for these types of questions.

RE: How to configure VLAN on extreme summit X450

Brian_Anderson3 — Wed, 16 Dec 2015 21:44:00 GMT

Don't forget to remove the vlan off of the port before you add. Gets me almost everytime .
Usually port is in Default
Configure vlan default delete ports

RE: How to configure VLAN on extreme summit X450

Ryan_Mathews — Thu, 17 Dec 2015 04:01:00 GMT

Good call out Brian for those new to EXOS.

Vignesh, the idea behind the Default VLAN was that you didn't need to configure a VLAN in EXOS to use the switch. All ports are in the VLAN Default, thus if you were looking for quick Layer-2 solution...away you go. Didn't need to configure a VLAN.

So, as Brian rightly calls out, if your first step is to build a VLAN you first have to remove the port from VLAN default. A quick example from GTAC Knowledge:
https://gtacknowledge.extremenetworks.com/articles/Q_A/Which-command-is-used-to-add-ports-to-a-vlan

As Drew says....welcome to the Hub Community. Glad you joined us.