topic RE: configure rule ELRP not in the configration in ExtremeSwitching (EXOS/Switch Engine)

configure rule ELRP not in the configration

JohanHendrikx — Wed, 14 Feb 2018 16:00:00 GMT

When I configure ELRP on a x440-G2-24P-10GE with firmware 22.4.1.4 like:

enable elrp-client
configure elrp-client periodic Default ports interval 1 log-and-trap disable-port permanent.

And I do a sh conf ELRP, I see:

configure elrp-client periodic vlan Default ports disable-port.

So I don't see whitch option I have configured ??

RE: configure rule ELRP not in the configration

Chad_Smith1 — Fri, 16 Feb 2018 22:17:00 GMT

Johan,

I have seen similar behavior in the past as well. Can you open up a case with GTAC so we can get it addressed?

RE: configure rule ELRP not in the configration

JohanHendrikx — Fri, 16 Feb 2018 22:17:00 GMT

Chad,

I will open a case with GTAC

RE: configure rule ELRP not in the configration

JohanHendrikx — Fri, 02 Mar 2018 17:20:00 GMT

I've got a reply from GTAC:

Use the CLI: sh conf elrp detail and noticed the options .