https://community.extremenetworks.com/t5/extremeswitching-exos-switch/show-status-of-the-cable-into-extremexos/m-p/57376#M16987 Is there any command in ExtremeXOS similar to exist in B5 / C5 to verify status of the physical connection?<BR /> <BR /> C5(ro)-&gt;show port cablestatus ge.1.1<BR /> <BR /> Port Status Length<BR /> --------- --------- -------<BR /> ge.1.1 Normal 59(m)-62(m)<BR /> <BR /> Thu, 17 Dec 2015 23:52:00 GMT Casimiro 2015-12-17T23:52:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/show-status-of-the-cable-into-extremexos/m-p/57376#M16987 Is there any command in ExtremeXOS similar to exist in B5 / C5 to verify status of the physical connection?<BR /> <BR /> C5(ro)-&gt;show port cablestatus ge.1.1<BR /> <BR /> Port Status Length<BR /> --------- --------- -------<BR /> ge.1.1 Normal 59(m)-62(m)<BR /> <BR /> Thu, 17 Dec 2015 23:52:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/show-status-of-the-cable-into-extremexos/m-p/57376#M16987 Casimiro 2015-12-17T23:52:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/show-status-of-the-cable-into-extremexos/m-p/57377#M16988 I was just looking for something like this. I have found reference to similar commands but unfortunately they don't appear to be in the latest version of code. So at this point, I don't think an equivalent command exists, at least on the x460 G2s. Fri, 18 Dec 2015 00:12:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/show-status-of-the-cable-into-extremexos/m-p/57377#M16988 Jeremy_Gibbs 2015-12-18T00:12:00Z