topic RE: How to schedule commands on X430 ? in ExtremeSwitching (EXOS/Switch Engine)

How to schedule commands on X430 ?

Robert_Zdzieblo — Tue, 27 Jun 2017 16:55:00 GMT

Hello,

I need periodically to disable PoE on some ports to reset CCTV cameras (eventually reboot the switch).
I was able to write python script, which disables inline-power and then re-enables inline-power on interesting ports. However, X430 series doesn't support UPM, so I cannot create upm profile and configure timer fot this profile.

Any other ideas for scheduling some cli commands on X430 series ?

REGARDS
Robert

RE: How to schedule commands on X430 ?

Ty_Izzet — Tue, 27 Jun 2017 17:17:00 GMT

Per the v16.2.3.5-patch1-3 Release Notes:

Universal Port Management (UPM) on Summit X430 Series Switches
Support for Universal Port Management (UPM) is now extended to the Summit X430 series switches.

RE: How to schedule commands on X430 ?

Robert_Zdzieblo — Tue, 27 Jun 2017 17:21:00 GMT

Thanks you, Taykin !

I was using summitlite-16.1.3.6.xos image.
I'll check this functionality after update.

RE: How to schedule commands on X430 ?

Robert_Zdzieblo — Wed, 28 Jun 2017 14:47:00 GMT

Yes, UPM is working on new summitlite-16.2.3.5-patch1-3.xos image !
Thanks !