topic RE: SYSLOG interface in ExtremeSwitching (EXOS/Switch Engine)

SYSLOG interface

EtherNation_Use — Wed, 08 Jan 2014 05:57:00 GMT

Create Date: Jan 4 2013 12:05AM

Is there a way to specify the interface using which the switch will forward the syslog messages to the server???

The reason being that I have only some VLANs that are permitted across the firewall to use port 514. As a result the switch with only those vlans or one of those vlans log messages but my core switches do not as I am assuming they are using VLANs that are not allowed across the firewall.

Is there a way to configure the switch in a way that it forwards the messages to syslog server using a specific VLAN IP address.

Note : I am using vr-default (from Arpit_Bhatt)

RE: SYSLOG interface

EtherNation_Use — Wed, 08 Jan 2014 05:57:00 GMT

Create Date: Jan 7 2013 10:52AM

configure log target syslog {ip address} from {vlan ip address} (from Jamie_Bedford)

RE: SYSLOG interface

EtherNation_Use — Wed, 08 Jan 2014 05:58:00 GMT

Create Date: Jan 8 2013 1:46AM

Thanks buddy...for some werid reason it resolved my issue coz the firewall was wide open and it should have worked (from Arpit_Bhatt)