topic problem with Config Booted on summit x450-g4 in ExtremeSwitching (EXOS/Switch Engine)

problem with Config Booted on summit x450-g4

Salvador_Gallo — Sat, 14 Jan 2017 03:41:00 GMT

when i configured switch this save configuration but if the switch reboot lost the configuration, i can see this configuration in the switch:

information on SW
####################
Slot: Slot-1 * Slot-2 ------------------------ ------------------------
Current State: MASTER BACKUP (In Sync)

Image Selected: secondary secondary
Image Booted: secondary secondary
Primary ver: 16.1.0.18 16.1.0.18
Secondary ver: 22.1.1.5 22.1.1.5

Config Selected: primary.cfg
Config Booted: Factory Default

primary.cfg Created by ExtremeXOS version 22.1.1.5
577404 bytes saved on Fri Jan 13 20:33:50 2017

RE: problem with Config Booted on summit x450-g4

Patrick_Voss — Sat, 14 Jan 2017 03:47:00 GMT

Hello Salvador,

You checked the "show config" to see if the config is missing? This is a stack, did you reboot the entire stack?

RE: problem with Config Booted on summit x450-g4

Salvador_Gallo — Sat, 14 Jan 2017 04:15:00 GMT

yes, i reboot the stack and the config lost, yesterday config this in the sw:

BootRom > config noneBootRom > boot after this config the switch lost the config the switch up with factory default

RE: problem with Config Booted on summit x450-g4

Patrick_Voss — Sat, 14 Jan 2017 04:32:00 GMT

Is there a reason you went to the bootrom and config none?

RE: problem with Config Booted on summit x450-g4

Salvador_Gallo — Sat, 14 Jan 2017 04:32:00 GMT

and how i can solve this problem ?

RE: problem with Config Booted on summit x450-g4

Patrick_Voss — Sat, 14 Jan 2017 04:32:00 GMT

Can you explain to me why the bootrom was accessed? Was this after it didn't boot into the config or before?

RE: problem with Config Booted on summit x450-g4

Salvador_Gallo — Sat, 14 Jan 2017 04:32:00 GMT

i need to restore to factory and in enterasys this was the procedure and i suppose that the process was the same

RE: problem with Config Booted on summit x450-g4

Patrick_Voss — Sat, 14 Jan 2017 04:32:00 GMT

Hello Salvador,

Can you explain the order of events? Config, Bootrom, Reboot?

unconfigure switch all will factory restore the configuration in exos. This is assuming you can login.

RE: problem with Config Booted on summit x450-g4

Salvador_Gallo — Sat, 14 Jan 2017 04:32:00 GMT

is all

RE: problem with Config Booted on summit x450-g4

Patrick_Voss — Sat, 14 Jan 2017 04:32:00 GMT

In what order?

RE: problem with Config Booted on summit x450-g4

Salvador_Gallo — Sat, 14 Jan 2017 04:32:00 GMT

ok, in this case reboot the switch and them press space bar and put de command config none and reboot, after when i configure save configuration and reboot the switch lost the configuration

RE: problem with Config Booted on summit x450-g4

Tripathy__Priya — Sun, 15 Jan 2017 08:14:00 GMT

Please emphasize on the order in which it was accessed......We knew t hat you had factory defaulted the switch to unconfigure all.

RE: problem with Config Booted on summit x450-g4

Prashanth_KG — Mon, 16 Jan 2017 12:51:00 GMT

HI Salvador,

As per the output of show switch, the switch is booted with the "factory default" configuration.
If we reset the switch with the command below,

BootRom > config none

This is an expected behaviour that the switch will boot with the factory default configuration after the command above in the bootrom.

Config Selected: primary.cfg

We might have a problem if you jus reboot the stack now and if it not loaded with the primary.cfg as mentioned above. So, please clarify the issue so that we can help you further.

Thanks.

RE: problem with Config Booted on summit x450-g4

bini — Wed, 10 Mar 2021 15:36:00 GMT

hello Salvador

Did you solve the issue?