topic SFP module inventory in ExtremeSwitching (EXOS/Switch Engine)

SFP module inventory

Cris_Collins — Thu, 09 Feb 2017 03:43:00 GMT

Is there a way to list installed SFP module model numbers from the CLI in EXOS 16.1.3.6 on a X670V-48x?

RE: SFP module inventory

davidj_cogliane — Thu, 09 Feb 2017 03:45:00 GMT

I believe the command is Debug Hal show optic information There might be a dash in there.

RE: SFP module inventory

BrandonC — Thu, 09 Feb 2017 03:45:00 GMT

You're right, David. 'debug hal show optic-info' should get this info.

RE: SFP module inventory

Cris_Collins — Thu, 09 Feb 2017 03:55:00 GMT

Worked great. Thank you for the quick response.

RE: SFP module inventory

networks — Thu, 09 Feb 2017 15:47:00 GMT

is there a similar command available for the A-/B-/C-/S-/K-series?

RE: SFP module inventory

Jason_Parker — Thu, 09 Feb 2017 16:04:00 GMT

That is a little tricky and once you filter though the results you should have a idea of the items So as a standalone switch Console Only Dev DumpSfp When in a stacking 2 or more You would run thesame ccommand above for the manager unit But In order to see the other units components This command only works on the manager switch enableMemberDevshell You can now move the console to each switches console and get the data

RE: SFP module inventory

Jason_Parker — Wed, 30 May 2018 03:00:00 GMT

Please note:
You can run the following command if using telnet/ssh to get the feedback
set remote enable