topic RE: Port-specific VLAN in ExtremeSwitching (EXOS/Switch Engine)

Port-specific VLAN

Andreas_Larsen — Sun, 15 Mar 2015 16:58:00 GMT

According to User guide 15.7 Port-specific VLAN is under the general VLAN section.

Again trying to configure this on a X440-24t with Edge license dosen't work.

X440-24t.1 # configure "vlan41" add ports 1 tagged 501Error: Port-specific VLAN tag is not supported on this platform

There is no reference in either User Guide/ License feature that this is only limited to certain plattforms. Or am I missing something ?

// Andreas

RE: Port-specific VLAN

Bill_Stritzinge — Sun, 15 Mar 2015 19:37:00 GMT

Andreas,

Just like your CEP question, something is definitely amiss... what code exactly are you using? That command should work fine on any platform.

Bill

RE: Port-specific VLAN

Stephane_Grosj1 — Sun, 15 Mar 2015 20:36:00 GMT

Hi,

x440 doesn't support this feature.
If the doc doesn't clearly say it, this is something we'll have to correct.

From the EXOS 15.4.1 RN:
Supported Platforms
• BlackDiamond 8800 xl-series only switches
• BlackDiamond X8 series switches
• Summit X480, X460, X670, and X770 series switches
• E4G-400 and E4G-200 cell site routers

RE: Port-specific VLAN

Andreas_Larsen — Sun, 15 Mar 2015 21:15:00 GMT

Yes cause the DOC states nothing that clearly dosent so I was think I did ? Please correct that.