topic Re: VLAN port management command syntax in ExtremeSwitching (EXOS/Switch Engine)

VLAN port management command syntax

bcyrus — Fri, 01 Oct 2021 22:59:08 GMT

Hi all,

Newbie networking guy here

I can’t seem to nail down the syntax for our 450-series switches. I’m a Cisco guy and used to say:

Switchport access vlan 15
Switchport access voice vlan 2

That switchport is now a member of the data vlan and the voice vlan.

What would the syntax be to achieve the same results, but on the 450-series switch?

Re: VLAN port management command syntax

Ronald_Dvorak — Sat, 02 Oct 2021 03:39:23 GMT

Hi bcyrus,

here is an example…

https://extremeportal.force.com/ExtrArticleDetail?an=000088085

-Ron

Re: VLAN port management command syntax

Gabriel_G — Thu, 14 Oct 2021 16:30:33 GMT

Ron's got the right idea, just add the data vlan as untagged, the voice vlan as tagged.
https://extremeportal.force.com/ExtrArticleDetail?an=000088085

Also, if your phone requires LLDP to learn it's voice VLAN, you can use these LLDP commands:
https://extremeportal.force.com/ExtrArticleDetail?an=000083139

If you're more familiar with Cisco Commands, this Command Cross-Reference may be helpful:

https://documentation.extremenetworks.com/CLI_X-Ref/1.0/CLI_X-Ref_Guide_1.0.pdf