topic Re: Port=1:45: Illegal STP BPDU format 45 in ExtremeSwitching (EXOS/Switch Engine)

Port=1:45: Illegal STP BPDU format 45

dleboeuf — Thu, 26 May 2022 17:47:07 GMT

Hello,

We recently installed a new stack of 5420Fs running firmware version 31.5.1.6 and I keep seeing these log messages multiple times a day "<Erro:STP.InBPDU.Drop> Slot-1: Port=1:45: Illegal STP BPDU format 45." I can't really seem to find any documentation online regarding this Illegal STP BPDU format error message, which is why I am here. When I check LLDP neighbors on that port, it looks like there is just a laptop on the other end, I am getting a Microsoft MAC address on the port. Should I configure this port as an edge port? Looks like it is set to auto, but is showing up as a point-to-point port which doesn't seem correct, but maybe it is? Not too familiar with STP on EXOS.

Thanks!

Re: Port=1:45: Illegal STP BPDU format 45

Gabriel_G — Fri, 27 May 2022 17:27:23 GMT

Hello,

That's an interesting one, I would imagine that there is a packet that is being recognized as STP but it isn't STP in reality. I would generally say to set that port as link-type edge if it is not connected to another networking device. Link-type auto should detect the port as edge, but since the switch thinks that it's getting a BPDU, that may be why it's putting it as P2P. That may stop the log messages, but you may need to perform a PCAP on the client machine at the time of the logs to see if you can identify what packet is triggering that message.

Hope that helps!

Re: Port=1:45: Illegal STP BPDU format 45

RiaanvS — Mon, 13 Mar 2023 10:40:36 GMT

Hi,

It looks like this might be related to the below article:

https://extremeportal.force.com/ExtrArticleDetail?an=000107345

Not sure if a fix has been released for this yet.