topic Re: SolarWinds Network Topology Mapper in ExtremeSwitching (EXOS/Switch Engine)

SolarWinds Network Topology Mapper

Mario_Gomez — Wed, 30 Oct 2019 01:37:27 GMT

Hi Team,

I’m testing SolarWinds Network Topology Mapper (NTM) but I’m having issues with the output, in some switches I’m able to see both Uplinks, and the Switches that I’m not able to see the UpLinks have the same configuration as the other ones.

Please advise.

Thanks

Re: SolarWinds Network Topology Mapper

Abanoub_Botros — Wed, 30 Oct 2019 01:48:07 GMT

Hi Mario,

I would like to ask which discovery method is being used (by NTM)to discover the switches within your environment.

Kind regards,

Abanou Botros

Re: SolarWinds Network Topology Mapper

Mario_Gomez — Wed, 30 Oct 2019 21:47:51 GMT

Hi Abanoub,

Thank you so much in advance.

The method that we use is SNMPv3.

Re: SolarWinds Network Topology Mapper

Abanoub_Botros — Wed, 30 Oct 2019 22:01:04 GMT

Hi Mario

Great!, are you able to verify the SNMPv3 configuration on the non-working switches is correct and if so, can you please verify by re-entering the SNMPv3 configuration with the needed credentials set on NTM and recheck (NTM).

Kind regards,

Abanou Botros