topic Re: how to set priority value for static route in extreme switch in ExtremeSwitching (EXOS/Switch Engine)

how to set priority value for static route in extreme switch

ompal_singh — Thu, 05 Dec 2019 19:50:26 GMT

how to set priority value for static route in extreme switch

i am putting two static route for same destination i want to install both routes how i need to put priority value so both route will install please guide me how to do.

Necheporenko__N — Thu, 05 Dec 2019 22:33:20 GMT

Hi,

Are you looking for ECMP feature?

Best Regards,

Nikolay

ompal_singh — Thu, 05 Dec 2019 23:40:09 GMT

Hi Necheporenko,

i want to configure these to routes

configure iproute add 10.81.35.224 255.255.255.248 10.1.2.10

configure iproute add 10.81.0.0. 255.255.0.0 10.2.3.9

I m using above link please guide me how to do it.