https://community.extremenetworks.com/t5/extremeswitching-exos-switch/recommended-switch-x440-g2-configuration/m-p/65233#M18228 you can do this in that way...<BR /> <BR /> the rear ports are sfp+ port --&gt;they can also run in 10G mode with license or for stacking...<BR /> <BR /> other device: X460-G2-24t-GE4 or 10GE4 Mon, 21 Jan 2019 20:14:20 GMT PeterK 2019-01-21T20:14:20Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/recommended-switch-x440-g2-configuration/m-p/65232#M18227 Good afternoon<BR /> I have a very simple doubt, ( of newbie ) and wanted some advice<BR /> We need to have 1switch x440-G2 , with 8 sfp ports to 1gb<BR /> I recommend the model x440-G2-24t-10GE4<BR /> Reading the technical specifications, would have a maximum of 8 sfp ports at the same time?<BR /> Is this right?<BR /> So the switch at its maximum capacity would be like this:<BR /> - 20 ports rj45<BR /> - 4 sfp ports to 1gb, front (combo ports)<BR /> - 4 sfp ports at 1 gb, at the rear of the switch<BR /> Is this configuration correct?<BR /> (the requirement is to have 8 uplinks and through the sfp ports)<BR /> Or would you recommend another model?<BR /> <BR /> In advance, thank you for your attention, and your help. Sat, 19 Jan 2019 03:30:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/recommended-switch-x440-g2-configuration/m-p/65232#M18227 Israel_CR 2019-01-19T03:30:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/recommended-switch-x440-g2-configuration/m-p/65233#M18228 you can do this in that way...<BR /> <BR /> the rear ports are sfp+ port --&gt;they can also run in 10G mode with license or for stacking...<BR /> <BR /> other device: X460-G2-24t-GE4 or 10GE4 Mon, 21 Jan 2019 20:14:20 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/recommended-switch-x440-g2-configuration/m-p/65233#M18228 PeterK 2019-01-21T20:14:20Z