https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x460-48p-visio-stencil-error/m-p/65945#M18327 <P>Hello Curtis,</P><P>open a GTAC case,&nbsp;please.&nbsp;Extreme employees can only work on the basis of a case.</P> Sun, 30 May 2021 11:45:19 GMT StephanH 2021-05-30T11:45:19Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x460-48p-visio-stencil-error/m-p/65944#M18326 <P>I know it’s a long shot that this will be corrected, but the stencil for the X460-48p is incorrect.&nbsp; It shows the&nbsp;fiber ports are shared, even though they are correctly labeled as ports 49-52.&nbsp; The stencil for the X460-48t is correct.</P><P>&nbsp;</P><P>Also, it’s nice that connection points have been added to stencils for newer equipment, but--and I know this is an even longer shot--it would be nice if stencils for older equipment got the same treatment.</P> Sun, 30 May 2021 06:01:39 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x460-48p-visio-stencil-error/m-p/65944#M18326 Curtis_Brabham 2021-05-30T06:01:39Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x460-48p-visio-stencil-error/m-p/65945#M18327 <P>Hello Curtis,</P><P>open a GTAC case,&nbsp;please.&nbsp;Extreme employees can only work on the basis of a case.</P> Sun, 30 May 2021 11:45:19 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x460-48p-visio-stencil-error/m-p/65945#M18327 StephanH 2021-05-30T11:45:19Z