topic Re: Does anyone have a script to get the port where access point based is connected based in your MAC OUI (MAC OUI previously defined) and then configure this port to pass one or more vlans em tagged mode? in ExtremeSwitching (EXOS/Switch Engine)

Does anyone have a script to get the port where access point based is connected based in your MAC OUI (MAC OUI previously defined) and then configure this port to pass one or more vlans em tagged mode?

Edson_Moura — Mon, 16 Nov 2020 10:19:46 GMT

It is possible to create a routine using Python script or otherwise on the switch, where the script detect the vendors mac address (Extreme Access Point as example) on the FDB checking every 30 minutes and then, if a MAC OUI = X is found, this script configure this port to pass two or more vlans in tagged mode.

Thansk,

Edson Moura

Re: Does anyone have a script to get the port where access point based is connected based in your MAC OUI (MAC OUI previously defined) and then configure this port to pass one or more vlans em tagged mode?

StephanH — Mon, 16 Nov 2020 14:49:26 GMT

Hello Edson,

this should be possible with a UPM script.

Check the XOS manual for “Universal Port” and have a look to that article:

https://gtacknowledge.extremenetworks.com/articles/Solution/How-to-detect-and-a-device-which-is-enabled-Proxy-ARP-feature-in-a-network

and that:

https://community.extremenetworks.com/extremeswitching-exos-223284/upm-sample-config-7822779