topic Re: x440 24-p poe support in ExtremeSwitching (EXOS/Switch Engine)

x440 24-p poe support

arghya_chatterj — Sun, 10 May 2020 20:42:32 GMT

can anyone tell me that x440-24p switch is poe supportble or not.

Re: x440 24-p poe support

BradP — Sun, 10 May 2020 21:14:02 GMT

Hi Arghya,

Yes, the “P” at the end of the model name indicates that this switch is the POE model. If it was “T”, it would be normal copper, and “X” indicates SFP.

Thanks
Brad

Re: x440 24-p poe support

arghya_chatterj — Sun, 10 May 2020 21:19:21 GMT

Thanks for valuble reply.actually the issue my x440-24p not supplying power to my cctv cameras(12v) suddenly but ethernet connection is there.

can ou please help on same.

Re: x440 24-p poe support

arghya_chatterj — Sun, 10 May 2020 21:26:45 GMT

Re: x440 24-p poe support

BradP — Sun, 10 May 2020 22:00:40 GMT

If you run the command “show inline-power info port <port>” What do you see displayed?

Re: x440 24-p poe support

arghya_chatterj — Sun, 10 May 2020 22:34:53 GMT

Hi,

please find below screen error

Re: x440 24-p poe support

BradP — Sun, 10 May 2020 22:37:15 GMT

This possibly could be a hardware issue. Please contact GTAC support to open a ticket and have the issue investigated.

Thank you,

Brad

Re: x440 24-p poe support

arghya_chatterj — Thu, 14 May 2020 00:58:38 GMT

Hi B,

I have changed my poe switch with another one.But in my new poe x440 switch 4 ports inline power is showing in disble.i am trying through enble command but no result.port blinking and showing active.

Re: x440 24-p poe support

BradP — Thu, 14 May 2020 01:00:21 GMT

If you run the command “show inline-power info port <port>” What do you see displayed?

Re: x440 24-p poe support

arghya_chatterj — Thu, 14 May 2020 08:19:02 GMT

It is showing those port are disble. Trying to enble it but not done. Is there any diagonise tool to up it.

Re: x440 24-p poe support

BradP — Thu, 14 May 2020 08:22:06 GMT

I hate to be the bearer of bad news, but it appears that switch may have a hardware issue as well.

https://gtacknowledge.extremenetworks.com/articles/Solution/Summit-PoE-failure-and-switch-pass-extended-diagnostic

Re: x440 24-p poe support

PeterK — Fri, 15 May 2020 21:51:19 GMT

12v cameras? 12v isn’t a PoE standard. PoE is normaly round about 48v.

Re: x440 24-p poe support

arghya_chatterj — Fri, 15 May 2020 22:27:13 GMT

thanks for all informatiom.

Currently i have installed 48p x440 and it’s working fine.can you tell me how can i configure mail notification of my poe switch port status.

Re: x440 24-p poe support

arghya_chatterj — Sat, 16 May 2020 18:57:35 GMT

Hi Team,

Can any one help how to configure port notification in mail.

Re: x440 24-p poe support

arghya_chatterj — Sun, 17 May 2020 11:32:58 GMT

Dear Team,

Can anyone help on the topic that-if any port of x440 switch becomes disble how to get alert through my mail.