topic Re: 30.2.1.8 ISO in ExtremeSwitching (EXOS/Switch Engine)

30.2.1.8 ISO

LDM — Tue, 11 Jun 2019 08:41:36 GMT

Extreme ISO 30.2.1.8 and 30.1.1.4 doesn't work on VMware workstation and Virtual Box. It pops with an error message "cannot find the boot device". I used below link to download the ISO file. Can you please verify file?

https://github.com/extremenetworks/Virtual_EXOS

Thanks,
LD

Re: 30.2.1.8 ISO

ukomarla — Tue, 11 Jun 2019 22:21:37 GMT

I have successfully installed and worked with the specified EXOS versions on Virtual Box.

The only time I had an issue was with 30.1.1.4, when I had mounted the installer ISO as 'IDE Primary Slave' and received the following error:

Is the error message you see similar?
If so, mounting the installer ISO as 'IDE Secondary Master' would solve the issue.
On Virtual Box, VM Instance Settings -> Storage -> Controller:IDE -> Optical Drive: 'IDE Secondary Master'
Hope this helps!

If not, can you provide the exact log messages you are seeing?

Re: 30.2.1.8 ISO

LDM — Wed, 12 Jun 2019 06:48:44 GMT

It could not read from the boot medium due to hard drive size allocated to VM was not enough. It's working now. I have attached error message screenshot for your reference.

Thanks for your help.