https://community.extremenetworks.com/t5/extremeswitching-exos-switch/determine-if-i-am-using-any-core-license-features/m-p/70355#M18773 I have an extreme stack consisting of 2 X460-48P switches that we are upgrading. The stack currently has a Core license applied. How can i easily tell which, if any features are being used out of this feature set?<BR /> <BR /> Thanks Fri, 12 Apr 2019 03:12:54 GMT DCinquegrani 2019-04-12T03:12:54Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/determine-if-i-am-using-any-core-license-features/m-p/70355#M18773 I have an extreme stack consisting of 2 X460-48P switches that we are upgrading. The stack currently has a Core license applied. How can i easily tell which, if any features are being used out of this feature set?<BR /> <BR /> Thanks Fri, 12 Apr 2019 03:12:54 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/determine-if-i-am-using-any-core-license-features/m-p/70355#M18773 DCinquegrani 2019-04-12T03:12:54Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/determine-if-i-am-using-any-core-license-features/m-p/70356#M18774 Take a look at the Feature License Requirements guide: https://documentation.extremenetworks.com/FLR_16/<BR /> Specifically, <A href="https://documentation.extremenetworks.com/FLR_16/EXOS_16_2/Feature_License_Requirements/r_core-license-features.shtml" target="_blank" rel="nofollow noreferrer noopener">this page</A>, which lists the features/protocols that require a core license. If none of these are configured, you're likely in good shape.<BR /> <BR /> You can use the "show config" command to check each area to see what is or isn't being used. Fri, 12 Apr 2019 03:21:43 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/determine-if-i-am-using-any-core-license-features/m-p/70356#M18774 Drew_C 2019-04-12T03:21:43Z