topic Re: what is the command to check etherchannel ports bandwidth ?? in ExtremeSwitching (EXOS/Switch Engine)

what is the command to check etherchannel ports bandwidth ??

deepak1 — Tue, 26 Nov 2019 00:09:01 GMT

what is the command to check etherchannel ports bandwidth ?? it is not showing the combined bandwidth of the bundled ports.. plzzz suggest

Re: what is the command to check etherchannel ports bandwidth ??

BradP — Tue, 26 Nov 2019 00:11:05 GMT

Hello deepak,

There is no command to check the total aggregate bandwidth of a load sharing group.

Thank you,

Brad

Re: what is the command to check etherchannel ports bandwidth ??

Alexandr_P — Tue, 26 Nov 2019 15:06:53 GMT

Hello, Deepak!

You can use python script - https://github.com/extremenetworks/ExtremeScripting/tree/master/EXOS/Python/LAGUtil

X670.2 # run script LAGUtil

 Lag total utilization % Mar 27 2017 09:33:42

 LAG (Total Speed) Rx (%) Tx (%)
=======================================================
 1 1Gb 68.58 2.06
 49 80Gb 0.07 7.49
=======================================================

Thank you!