topic Re: Base T on Base X switch in ExtremeSwitching (EXOS/Switch Engine)

Base T on Base X switch

kri2020 — Tue, 30 Jul 2019 01:03:20 GMT

Can i install 1000baseT tranceiver in X460-G2-48X-10GE4 model?

Re: Base T on Base X switch

EtherMAN — Tue, 30 Jul 2019 01:07:55 GMT

Yes...

Re: Base T on Base X switch

kri2020 — Tue, 30 Jul 2019 01:20:26 GMT

Link LED glows in X460-G2-48X-10GE4 switch when we install 1000base T , but couldn't ping another device connected to same switch.

Re: Base T on Base X switch

EtherMAN — Tue, 30 Jul 2019 01:34:03 GMT

Show port config port xx Port where base t is installed
Show port info detail port xx same as above.

if you have a pc plugged into the switch via cat 5 there are many thing that need to be in place to connect to another device on the 460. Are you using vlans? if the switch just set up where all ports are still in default vlan ??

link to configuration guide https://documentation.extremenetworks.com/exos_22.3/exos_21_1/lldp/t_configuration-overview.shtml

Re: Base T on Base X switch

kri2020 — Tue, 30 Jul 2019 02:04:23 GMT

I will get you the port config tommorrow from site.
In local building where X460-G2-48X-10GE4 is installed through base T SFP master server PC H90 is installed. 1GBps port.

Other connections to this switch are server PC connected from other buildings using SFP LX 1310nm. 1GBPS.

Our doubt is whether Base T MGBIC can be installed since manual says X460-G2-48X-10GE4 is 48 baseX SFP which is Fibre ports.

vlan is not used.all ports are in default configuration..

Thanks

Re: Base T on Base X switch

Alexandr_P — Tue, 30 Jul 2019 14:42:10 GMT

Hi!

Earlier we had issues with some Base-T optics.
Issue resolved by disabling autonegotiation, and manually configuring speed 1000.
#conf port X auto off speed 1000 ...

Thank you!

Re: Base T on Base X switch

FredrikB — Tue, 30 Jul 2019 21:27:30 GMT

Also, is this an Extreme original SFP or a 3rd party? Extreme original should work, but 3rd party SFPs (1000Base-T) can act in different ways depending on the switch model. You CANNOT use it in combo ports, though (not even Extreme original), but then again, why should you?

Re: Base T on Base X switch

kri2020 — Wed, 31 Jul 2019 14:42:23 GMT

Tried changing Port speed to 1000, no sucess

Re: Base T on Base X switch

kri2020 — Wed, 31 Jul 2019 14:43:13 GMT

SFP used is Original Extreme , and not on combo port