https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x440g2-change-baud-rate/m-p/77638#M19616 Its not possible at this time. Wed, 09 Oct 2019 01:11:34 GMT BradP 2019-10-09T01:11:34Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x440g2-change-baud-rate/m-p/77637#M19615 I can serial into the x440g2 w/Exos 30.3 - no problem - appears to be set for 9600,n,8,1.<BR /> I would like to be using 115.200K. I did not see this covered in the command reference guide.<BR /> Maybe I just missed it - but anyways, is it possible to up the baud rate to 115.2K ? Wed, 09 Oct 2019 01:07:48 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x440g2-change-baud-rate/m-p/77637#M19615 Extreem 2019-10-09T01:07:48Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x440g2-change-baud-rate/m-p/77638#M19616 Its not possible at this time. Wed, 09 Oct 2019 01:11:34 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/x440g2-change-baud-rate/m-p/77638#M19616 BradP 2019-10-09T01:11:34Z