topic Re: SSH access not working on summit x440 with 16.2.5.4 -pathc-13 firmware version in ExtremeSwitching (EXOS/Switch Engine)

SSH access not working on summit x440 with 16.2.5.4 -pathc-13 firmware version

grimado_LA — Sat, 09 May 2020 01:54:15 GMT

Hi, everyone

I have ssh enabled on my x440, I have restarted processes and also re enable ssh2, and still cannot access via ssh.

I have issue this comands

“restart process exsshd”

and also

“restart process thttpd”

and still cannot access to the device.

Any sugestion?

Thanks to everyones!

Re: SSH access not working on summit x440 with 16.2.5.4 -pathc-13 firmware version

BradP — Sat, 09 May 2020 01:55:40 GMT

Is the IP pingable from the machine that you are trying to SSH from?

Re: SSH access not working on summit x440 with 16.2.5.4 -pathc-13 firmware version

grimado_LA — Sat, 09 May 2020 01:57:50 GMT

Hi B-rad,

sure, the device is pingable, i also have access to it through telnet

Re: SSH access not working on summit x440 with 16.2.5.4 -pathc-13 firmware version

BradP — Sat, 09 May 2020 01:59:17 GMT

Try updating your SSH client. The encryption being used might be getting denied from the switch.

Re: SSH access not working on summit x440 with 16.2.5.4 -pathc-13 firmware version

grimado_LA — Sat, 09 May 2020 02:11:11 GMT

hi,

what do you mean by updating my ssh client? i have looked for an ssh module for this model, but i think it does not exist.

Re: SSH access not working on summit x440 with 16.2.5.4 -pathc-13 firmware version

BradP — Sat, 09 May 2020 02:22:18 GMT

Hi Grimado_LA,

I mean the software that you are using to SSH to the switch. Is it possible to upgrade that software? Or check to see which encryptions are being used?

Thanks
Brad