topic Re: SW Extreme + Fortigate in ExtremeSwitching (EXOS/Switch Engine)

SW Extreme + Fortigate

Bryan_Hernadez — Wed, 17 Jul 2019 05:00:34 GMT

Friends, a query how can I do so that the VLAN that believes in my Fortigate is read by the SW Extreme, and so the Fortigate will deliver DHCP to that Vlan, make the configurations that should be done, but I do not find it, I attach the images so you can help me!
Thank you !!

FORTIGATE :

SW EXTREME :

TOPO :

Re: SW Extreme + Fortigate

Alexandr_P — Wed, 17 Jul 2019 13:33:33 GMT

Hi, Bryan!

Based on FG and EXOS, I think all OK.
What is your main question?
What is issue?

Thank you!

Re: SW Extreme + Fortigate

Bryan_Hernadez — Thu, 18 Jul 2019 01:36:34 GMT

HI Alexsandre !

It happens that when connecting a computer to the extreeme SW (port 2 as shown in the image) it is not delivering ip to me by DHCP, it tells me unidentified network.

Regards !

Re: SW Extreme + Fortigate

Matthew_Hum — Fri, 19 Jul 2019 09:20:04 GMT

So to clarify you are getting an IP, but the windows system says Unidentified Network and not your network name?

Try setting the DNS domain name option in the DHCP server on your fortigate. I'm not sure what version you are using but you can try this: https://alstechcorner.blogspot.com/2013/12/how-to-configure-dhcp-custom-options-on.html

Re: SW Extreme + Fortigate

Furkan_Sabanci — Fri, 19 Jul 2019 17:46:10 GMT

Hi Bryan,

Your configs are ok. But i think you are getting a software problem. maybe you can check these out,
1) connect your pc directly to firewall's port 2 and make sure getting ip
2)if it's getting ip with directly connection, update your exos sw, change firmware, there is a lot of virtual exos images
3) if it's not work for you, try to config an ip address on your sw's vlan block and config dhcp in only switch.

Regards!
Furkan