topic Re: Strange warning on X440-G2 22.6 when creating VLANs in ExtremeSwitching (EXOS/Switch Engine)

Strange warning on X440-G2 22.6 when creating VLANs

Tomasz — Fri, 12 Mar 2021 04:42:08 GMT

Hello,

I’m playing around with my X440-G2 with 22.6.1.4 EXOS.

I’ve created couple of VLANs and been using it from time to time. Today I created two more and wanted to add ports to them and a strange message appeared. Ports were added successfully though:

pylon.12 # conf vlan 1112-1113 add port 5-7 tag
acl:getVlanIfFromServer:3013 - An undefined message 2002 here !!!!
acl:getVlanIfFromServer:3013 - An undefined message 2002 here !!!!

I’ve no ACLs deployed and when issuing ‘show access-list dynamic’ I just see “hclag_arp...” system dynamic ACL.

It worked so I’m happy anyway, but did anyone encounter this? Is this something I should be worried about?

Thanks,

Tomasz

Re: Strange warning on X440-G2 22.6 when creating VLANs

Tomasz — Sat, 13 Mar 2021 04:15:59 GMT

P.S. I had the same situation today. I don’t know if that makes any sense to narrow the conditions down but it happened upon first vlan add port command after boot (+ console connection):

* pylon.22 # conf vlan 600,620-622 add port 1 tag
acl:getVlanIfFromServer:3013 - An undefined message 2002 here !!!!
acl:getVlanIfFromServer:3013 - An undefined message 2002 here !!!!
acl:getVlanIfFromServer:3013 - An undefined message 2002 here !!!!
* pylon.23 # conf vlan 601,624-626 add port 2 tag
* pylon.24 # conf vlan 602,627-629 add port 3 tag
* pylon.25 # conf vlan 600-629 add port 1 tag

Cheers,

Tomasz

Re: Strange warning on X440-G2 22.6 when creating VLANs

Tomasz — Mon, 15 Mar 2021 22:27:15 GMT

Hey @Sam Pirok, now I see I put it under EXOS but ATP>EXOS lol. Might I ask you to move the topic to the general audience category pls? 🙂

Thanks,

Tomasz

Re: Strange warning on X440-G2 22.6 when creating VLANs

SamPirok — Mon, 15 Mar 2021 22:34:34 GMT

No problem @Tomasz, thanks for letting me know 😃

Re: Strange warning on X440-G2 22.6 when creating VLANs

PeterK — Wed, 17 Mar 2021 16:17:50 GMT

Do you have the chance to go to 22.7 or 30.7?

Re: Strange warning on X440-G2 22.6 when creating VLANs

Tomasz — Wed, 17 Mar 2021 16:54:36 GMT

Hi Peter,

Yes, I can upgrade, I’m just asking to know what is this message about and should I be bothered if a customer running 22.6 asks me the same, or should I tell him to just upgrade and forget about it. 🙂

Thanks,
Tomasz

Re: Strange warning on X440-G2 22.6 when creating VLANs

Stefan_K_ — Wed, 17 Mar 2021 18:06:45 GMT

I don’t think somebody here on the forum could answer this question, unless an extreme employee from the right department steps by. 😄 (It’s always the same: When some of the top posters has a question, it’s usually not an easy one. )

Best thing would be to raise a GTAC ticket.

Re: Strange warning on X440-G2 22.6 when creating VLANs

DeVoID — Fri, 19 Mar 2021 18:33:55 GMT

and so……….. want to post back the answer? as i dont think saying to call GTAC is the “Best Answer”.. just saying...

Re: Strange warning on X440-G2 22.6 when creating VLANs

Tomasz — Fri, 19 Mar 2021 20:59:00 GMT

Hi,

Oh, I missclicked Like, now I like the post and I’d like to post back the answer. 😄 Dunno how to do that.

I’m still interested in some fun facts about this message to be clear.

I also get this during bootup (around first ‘pending aaa’ message appearance):

acl:getVpifsOnVlanFromServer-2852 - ipmlRecv failed, ret: -111, peerId: 28.

Thanks,

Tomasz