https://community.extremenetworks.com/t5/extremeswitching-exos-switch/exos-platform-allowed-command-per-user-through-radius/m-p/83671#M20359 Ragavendiran, <BR /> <BR /> This option is not available through EXOS or RADIUS, per the following article:<BR /> <BR /> https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-you-have-per-user-allowed-command-permissions-when-using-a-radius-server-for-authentication<BR /> <BR /> The following post does give some insight on privilege levels using TACACS:<BR /> <BR /> https://community.extremenetworks.com/extremeswitching-exos-223284/xos-restrict-cli-commands-6856140<BR /> <BR /> Privilege levels are handled by RADIUS on the server side. On the RADIUS server a normal user is needed for user access. If the user needs admin privileges on the switch the RADIUS user should be configured to send the RADIUS Service-Type attribute with a value of Administrative. For further information on this attribute, see <A href="https://tools.ietf.org/html/rfc2865#section-5.6" target="_blank" rel="nofollow noreferrer noopener">Section 5.6 of RFC 2865</A>. Wed, 14 Aug 2019 20:39:31 GMT Ty_Izzet 2019-08-14T20:39:31Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/exos-platform-allowed-command-per-user-through-radius/m-p/83670#M20358 Hi,<BR /> <BR /> How to configure Allowed command per user through RADIUS?<BR /> <BR /> I already done the RADIUS with VSA 210 and switch login in admin level access.<BR /> <BR /> I want to restricts the commands. Tue, 06 Aug 2019 14:55:50 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/exos-platform-allowed-command-per-user-through-radius/m-p/83670#M20358 Ragavendiran 2019-08-06T14:55:50Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/exos-platform-allowed-command-per-user-through-radius/m-p/83671#M20359 Ragavendiran, <BR /> <BR /> This option is not available through EXOS or RADIUS, per the following article:<BR /> <BR /> https://gtacknowledge.extremenetworks.com/articles/Q_A/Can-you-have-per-user-allowed-command-permissions-when-using-a-radius-server-for-authentication<BR /> <BR /> The following post does give some insight on privilege levels using TACACS:<BR /> <BR /> https://community.extremenetworks.com/extremeswitching-exos-223284/xos-restrict-cli-commands-6856140<BR /> <BR /> Privilege levels are handled by RADIUS on the server side. On the RADIUS server a normal user is needed for user access. If the user needs admin privileges on the switch the RADIUS user should be configured to send the RADIUS Service-Type attribute with a value of Administrative. For further information on this attribute, see <A href="https://tools.ietf.org/html/rfc2865#section-5.6" target="_blank" rel="nofollow noreferrer noopener">Section 5.6 of RFC 2865</A>. Wed, 14 Aug 2019 20:39:31 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/exos-platform-allowed-command-per-user-through-radius/m-p/83671#M20359 Ty_Izzet 2019-08-14T20:39:31Z