topic How to ENABLE untagged vlan warning before changing automatically? in ExtremeSwitching (EXOS/Switch Engine)

How to ENABLE untagged vlan warning before changing automatically?

Hugrod — Thu, 27 May 2021 00:52:13 GMT

When adding a port to a VLAN sometimes the engineer forgets to add the tagged command at the end and it automatically changes the untagged VLAN. How can I enable a warning so that it asks if they are sure they want to do that and they have to press (y/n) depending on what they want to do?

Re: How to ENABLE untagged vlan warning before changing automatically?

Stefan_K_ — Thu, 27 May 2021 01:28:26 GMT

Hi,

configure vlan untagged-ports auto-move off

with this command you can’t simply change the untagged vlan of a port. You first have to delete the current untagged vlan - so it would be the ideal solution for you.

> configure vlan Default add ports 2
Error: Protocol conflict when adding untagged port 2. Port 2 is already untagged in vlan "Test".
Either add this port as tagged or assign another protocol to this VLAN.

Best regards
Stefan

Re: How to ENABLE untagged vlan warning before changing automatically?

Hugrod — Thu, 27 May 2021 01:33:24 GMT

Thank you for the information I will check it out.