topic Re: Very strange behavior of Macsec adapter on X440-G2 in EXOS 30.6 and 30.7 in ExtremeSwitching (EXOS/Switch Engine)

Very strange behavior of Macsec adapter on X440-G2 in EXOS 30.6 and 30.7

jeronimo — Tue, 08 Dec 2020 03:14:19 GMT

Hey, Can someone shed some light on the following behavior please:

Platform: X440-G2-12t EXOS 30.6, no Macsec license installed

It takes a long time after boot for the adapter to come online
Ports on adapter go into constant green
Using a loopback cable between the two ports does not show any lldp neighbors

In EXOS 30.7

It still takes a long time for the adapter and its ports to become available after boot
Ports on switch go to green
Ports on adapter blink
Using a loopback cable between the two ports, lldp neighbors shows the other port respectively

In both cases, it takes 3 minutes or more for the macsec ports to show any activity at all.

Is the described behavior normal? (Tried two adapters with both EXOS versions)

Re: Very strange behavior of Macsec adapter on X440-G2 in EXOS 30.6 and 30.7

PeterK — Tue, 08 Dec 2020 15:26:37 GMT

I had same issue on X670G2 with MACsec adapter… just for using LRM optics.

Re: Very strange behavior of Macsec adapter on X440-G2 in EXOS 30.6 and 30.7

jeronimo — Tue, 08 Dec 2020 17:31:54 GMT

Were these official optics? I had the feeling too that using CWDM optics were special. I’ll have to test again with normal SR SFPs

Re: Very strange behavior of Macsec adapter on X440-G2 in EXOS 30.6 and 30.7

jeronimo — Tue, 08 Dec 2020 23:13:37 GMT

Interestingly, independently of the type of optics “show port transceiver” or “debug hal show optic-info” immediately shows the transceiver as well as RX/TX power. But the link only goes up like 3 minutes later...

Re: Very strange behavior of Macsec adapter on X440-G2 in EXOS 30.6 and 30.7

jeronimo — Fri, 16 Sep 2022 17:31:46 GMT

Well... it's documented at least 😉

https://documentation.extremenetworks.com/extremeswitching/GUID-C5BAA10C-35E7-4819-AC15-304F7353F8E6.shtml

"LRM/MACsec Adapter initialization may take extended time - about 40-85 seconds per adapter plus 15-35 seconds per transceiver, depending on the platform type used with the adapter."