topic Re: How do I convert the ip dvmrp command from switch S8 (EOS) to X695 (EXOS) ? in ExtremeSwitching (EXOS/Switch Engine)

How do I convert the ip dvmrp command from switch S8 (EOS) to X695 (EXOS) ?

tovaristh — Sun, 22 Aug 2021 08:08:10 GMT

Hello everyone in the community!

We have an S8 (EOS) switch and we are moving to an X695 (EXOS). I converted the settings from EOS to EXOS, but I'm having trouble converting the IP DVMRP command from EOS to EXOS. Please can you help me?

Below is the configuration excerpt:

vlan.0.91 interface
ip address xxx.xxx.xxx.xxx nnn.nnn.nnn.nnn primary
ip dvmrp
IPv6 forwarding
no shutdown
exit

Re: How do I convert the ip dvmrp command from switch S8 (EOS) to X695 (EXOS) ?

Stefan_K_ — Mon, 23 Aug 2021 02:43:48 GMT

I’m not sure if EXOS even supports DVMRP. You could take a look at other techniques, e.g. MVR.

How To: How to configure “Static” MVR regardless of IGMP join | Extreme Portal (force.com)

Re: How do I convert the ip dvmrp command from switch S8 (EOS) to X695 (EXOS) ?

tovaristh — Mon, 23 Aug 2021 19:42:05 GMT

Thank you Stefan !!