https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mutli-paths-routes/m-p/87628#M20878 <P>Good afternoon,&nbsp;</P> <P>I have a switch that has 2 legs to get to a remote server,&nbsp;</P> <P>i thought they were both working but when i disabled the one today the other leg didn’t pick up.&nbsp;</P> <P>i tried atracert and it&nbsp; didn’t connect up until i re-enabled the link.&nbsp; so i’m assuming a routing issue.&nbsp;</P> <P>Sorry kinda new to this, is there a way to have mutliple routes to the same network and have one of the routes not in use unless the primary route goes down?&nbsp;</P> <P>&nbsp;</P> <P>x460G2-48-g4 is one of the switches, going to 2 different extreme switches.&nbsp;</P> Mon, 20 Jan 2020 02:21:01 GMT slewfoot2xm 2020-01-20T02:21:01Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mutli-paths-routes/m-p/87628#M20878 <P>Good afternoon,&nbsp;</P> <P>I have a switch that has 2 legs to get to a remote server,&nbsp;</P> <P>i thought they were both working but when i disabled the one today the other leg didn’t pick up.&nbsp;</P> <P>i tried atracert and it&nbsp; didn’t connect up until i re-enabled the link.&nbsp; so i’m assuming a routing issue.&nbsp;</P> <P>Sorry kinda new to this, is there a way to have mutliple routes to the same network and have one of the routes not in use unless the primary route goes down?&nbsp;</P> <P>&nbsp;</P> <P>x460G2-48-g4 is one of the switches, going to 2 different extreme switches.&nbsp;</P> Mon, 20 Jan 2020 02:21:01 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mutli-paths-routes/m-p/87628#M20878 slewfoot2xm 2020-01-20T02:21:01Z