How to configure PVST+ between x450-G2 and a CISCO

Victor_Sumano — Wed, 18 Mar 2020 03:14:12 GMT

I have a Cisco Switch as a Core, and I have 3 Stack of X450-G2 each ones, I have a lot of topology Changes, hundreds per day. The topology it’s a star so I have 1 port from the cisco to 1 port to each one of my stacks.

Cisco is configure with PVST+, so I need some help to understand how to configure in my EXOS switches.

All my trunk ports on my stacks are 1:52. the mac address for my root its the cisco, but I have MSTP configured

I’ve been reading a lot of gtac knowledge articles, and some other here, but each one, of course, are diferent.

Can some one help me how to configure in my EXOS switches.

This is the actual status of stpd:

Slot-2 MDF_Stack_7.1 # show stpd detail

Stpd: s0       Stp: ENABLED       Number of Ports: 202
Rapid Root Failover: Disabled
Operational Mode: MSTP           Default Binding Mode: 802.1D
MSTI Instance:    CIST
802.1Q Tag: (none)
Ports: 1:6,1:7,1:9,1:10,1:11,1:12,1:13,1:14,1:15,1:16,
1:17,1:18,1:19,1:20,1:21,1:22,1:23,1:24,1:25,1:26,
1:27,1:28,1:29,1:30,1:31,1:32,1:33,1:34,1:35,1:36,
1:37,1:38,1:39,1:40,1:41,1:42,1:43,1:44,1:45,1:46,
1:47,1:48,1:49,1:50,1:51,1:52,2:1,2:2,2:3,2:4,
2:5,2:6,2:7,2:8,2:9,2:10,2:11,2:12,2:13,2:14,
2:15,2:16,2:17,2:18,2:19,2:20,2:21,2:22,2:23,2:24,
2:25,2:26,2:27,2:28,2:29,2:30,2:31,2:32,2:33,2:34,
2:35,2:36,2:37,2:38,2:39,2:40,2:41,2:42,2:43,2:44,
2:45,2:46,2:47,2:48,2:49,2:50,2:51,2:52,3:1,3:2,
3:3,3:4,3:5,3:6,3:7,3:8,3:9,3:10,3:11,3:12,
3:13,3:14,3:15,3:16,3:17,3:18,3:19,3:20,3:21,3:22,
3:23,3:24,3:25,3:26,3:27,3:28,3:29,3:30,3:31,3:32,
3:33,3:34,3:35,3:36,3:37,3:38,3:39,3:40,3:41,3:42,
3:43,3:44,3:45,3:46,3:47,3:48,3:49,3:50,3:51,3:52,
4:1,4:2,4:3,4:4,4:5,4:6,4:7,4:8,4:9,4:10,
4:11,4:12,4:13,4:14,4:15,4:16,4:17,4:18,4:19,4:20,
4:21,4:22,4:23,4:24,4:25,4:26,4:27,4:28,4:29,4:30,
4:31,4:32,4:33,4:34,4:35,4:36,4:37,4:38,4:39,4:40,
4:41,4:42,4:43,4:44,4:45,4:46,4:47,4:48,4:49,4:50,
4:51,4:52
Participating Vlans: Administracion,CCTV_Control_de_Acceso,Default,Etherne,Ethernet_Adicional,
Printing,RED_192_168_150_0-24,Servers,Transporte,Videoconferencia,
VoIP,Wifi_Global,Wifi_Group,WiFi_Guest
Auto-bind Vlans: Administracion,CCTV_Control_de_Acceso,Default,Etherne,Ethernet_Adicional,
Printing,RED_192_168_150_0-24,Servers,Transporte,Videoconferencia,
VoIP,Wifi_Global,Wifi_Group,WiFi_Guest
Bridge Priority : 32768       Bridge Priority Mode: 802.1t
Operational Bridge Priority: 32768
BridgeID        : 80:00:02:04:96:b4:16:c6
Designated root    : 40:01:00:d6:fe:c3:ce:00
CIST Root        : 40:01:00:d6:fe:c3:ce:00
CIST Regional Root    : 80:00:02:04:96:b4:16:c6
External RootPathCost : 20000    Internal RootPathCost: 0
Root Port : 1:52
MaxAge : 20s   HelloTime : 2s   ForwardDelay : 15s
CfgBrMaxAge : 20s    CfgBrHelloTime: 2s   CfgBrForwardDelay: 15s
RemainHopCount: 20   CfgMaxHopCount: 20
Topology Change Time : 35s       Hold time : 1s
Topology Change Detected : FALSE       Topology Change : FALSE
Number of Topology Changes : 36364
Time Since Last Topology Change: 911s
Topology Change initiated locally on Port 1:52
Topology Change last received on Port 1:52 from 00:d6:fe:c3:ce:01
Backup Root : Off    Backup Root Activated : FALSE
Loop Protect Event Window : 180s     Loop Protect Threshold : 3
New Root Trap : On    Topology Change Trap : Off
Tx Hold Count : 6
Participating VLANs:
VLAN Tag Number of Ports
Ports
-------------------------------------------------------------------------------
Administracion 15 19
1:7(F),1:17(D),1:29(F),1:30(F),1:31(F),1:38(D),1:39(F),1:40(F),
1:41(F),1:42(F),1:43(D),1:44(F),1:45(F),1:46(F),1:47(F),1:48(D),
1:51(D),1:52(F),3:48(D)
CCTV_Control_de_Acceso 11 35
1:51(D),1:52(F),2:1(F),2:3(F),2:5(F),2:6(F),2:7(F),2:9(F),
2:11(F),2:13(F),2:15(F),2:17(F),2:19(F),2:20(F),2:21(F),2:23(F),
2:25(F),2:27(F),2:29(F),2:31(F),2:33(F),2:35(F),2:37(F),2:38(F),
2:39(F),2:40(F),2:41(F),2:42(F),2:43(F),2:44(D),2:45(F),2:46(D),
2:47(F),2:48(F),3:48(D)

Re: How to configure PVST+ between x450-G2 and a CISCO

BradP — Wed, 18 Mar 2020 03:17:30 GMT

Hi Victor,

Please see the following document:

https://extremeportal.force.com/ExtrArticleDetail?an=000079698

Also, pelase be aware that we cannot add the native vlan because Cisco’s implementation is proprietary when it includes the native vlan.

Thanks
Brad

topic Re: How to configure PVST+ between x450-G2 and a CISCO in ExtremeSwitching (EXOS/Switch Engine)

How to configure PVST+ between x450-G2 and a CISCO

Re: How to configure PVST+ between x450-G2 and a CISCO